Hello!
It has been a while since I have been on this forum (mostly because there are smarter and more qualified people already answering questions), but I was recently sucked into the DIY pixels from Ray Wu after my great LOR CCPixel debacle.
I jumped in head first and I have 5 E682 boards running 5 universes each. I have some pixel flicker issues that I would like to fix. I have attached a video of the problem
My question is: you can see in the video that the flicker on the whole strings starts at one specific pixel. If I swap that pixel will it fix the issue? Or is the whole string bad?
If I swap the troubled string into a different socket I get the same issue (and the other string works just fine).
These are 5V WS2811 pixels.
Thank you for your input.
Eric
Which firmware are you using?
John posted a new version on his site, seems there is a timing issue with recent batches of 2811's that causes a flicker with "older" firmware versions. Think .049 is the latest for 682's.
Check on Sandevices homepage.
I will look, jim said the new firmware wouldnt change anything with the 2811s, just the 2801s so i did not bother at the time. I just swapped out a board with a new one I received last week (unrelated idiot end user issue) and had the same results.
Ray said to ship them back and he would replace them. But if its just "A" bad pixel here and there I can manage, but I don't want to start chopping up the string and then send it back to him in pieces!!
Guess I can try replacing one this weekend...
And a firmware update for all boards!
Thank you
Eric
Ah, sorry, you are right.. that was the 2801's refered too... I misread your post 🙂
no there is one for the 2811. i have did it for my 680's and it works awesome. you may have to email jim to find out if he released it but there is one for the 2811. so there is light at the end of the tunnel. email him.
The latest firmware, that corrects the timing issues with the 2811s on the E682 is .049, and Jim has it available for download here: http://sandevices.com/downloads.html
If you're looking for firmware for the E680 or E681, you'll need to send Jim an email.
What bothers me is if the flickering is partway down the string. I can see Jim's update fixing a problem that shows up at the beginning of the string but not a single pixel partway down the string unless it was a flicker that moved from pixel to pixel during a single scan. The reason I say this is because the first pixel regenerates the signal so the timing should be spot on to all the rest in the string.
I could be wrong but this is what come to mind when I hear about this.
i had flicker all up and down the strings and it fixed it. could of just all been mixed up in the batch i had got.
timon wrote:What bothers me is if the flickering is partway down the string. I can see Jim's update fixing a problem that shows up at the beginning of the string but not a single pixel partway down the string unless it was a flicker that moved from pixel to pixel during a single scan. The reason I say this is because the first pixel regenerates the signal so the timing should be spot on to all the rest in the string.I could be wrong but this is what come to mind when I hear about this.
I can say that the 2811s that I had issues with, were all in the middle of the strings, except 1 that started at the first pixel. I won't claim to fully understand it, just my personal observations.
timon wrote:What bothers me is if the flickering is partway down the string. I can see Jim's update fixing a problem that shows up at the beginning of the string but not a single pixel partway down the string unless it was a flicker that moved from pixel to pixel during a single scan. The reason I say this is because the first pixel regenerates the signal so the timing should be spot on to all the rest in the string.I could be wrong but this is what come to mind when I hear about this.
I agree and so did Ray. 13 out of 80 strings had this issue (was apparent when I tested them but I was a newbie I just assumed it was okay since so many were the same way).
Can the weekend get here any faster!!!!
