Working on a new pi...
 
Notifications
Clear all

Working on a new pixel controller.

33 Posts
16 Users
0 Reactions
8,882 Views
Posts: 447
(@blackbeard)
Honorable Member
Joined: 18 years ago

I'm just posting so I can follow this, and all of this sounds pretty nice. I don't have any pixels to play with yet. Any time competition is introduced, it can only make things better as long as quality is part of the design.


Reply
Posts: 1133
(@toozie21)
Noble Member
Joined: 19 years ago

I can't wait to hear more. This sounds pretty sweet!


Reply
critic2
Posts: 1389
(@critic2)
Noble Member
Joined: 17 years ago

Waiting patiently.


Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

Well one update. The first version of the PCB would handle about 400-2811 pixels, 600-2801 and 3001 would be about 300. I am thinking of a new method that could double the node count but add $10.00 -15.00 to cost of the board and reduce the string types by half. So one group of eight and four groups of two. Five groups total.


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Considering I use 2811's presently, 6400 pixels on a single controller fits the largest displays I have with just a single controller so not sure if doubling that would make much of a difference in my case.

To me the bigger question at this point would be the power injection boards you were talking about in conjunction with this new controller to be able to take advantage of this large increase in pixel ability, running this number of pixels to me means I am going to have long runs of them which will make power injection the bigger concern to me.


Reply
Page 4 / 7
Share: