Working on a new pi...
 
Notifications
Clear all

Working on a new pixel controller.

33 Posts
16 Users
0 Reactions
8,885 Views
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago

I am really looking forward to this board. This style fits my personal thought process of 24-30V power and differential data runs to eliminate IR drop issues and data lengths.

The new INK pixels (Clone of ws2811) can be fed with 12VDC and the stips have built in 5V buck converters.

Dave, the timing of the INKs appear to be slightly different than the WS2811s. Will these be supported? I can send you some of these to try if you would like.


Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

Yes it will. Great question.


Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

Update.

The prototype Ethernet PHY Board for E131 input option has been tested and is working fine. This was the part of design that we were anxious about since we have not done Ethernet input on any of our other designs. The board is all through hole except PHY chip so it will be easy for end user to solder when bought in coop or kit. The PHY chip will be mounted on PCB for user. Down the road we may do a smaller all surface mount board.

I also received 10 micro processors from Microchip two months before Mouser is shipping them so that will help speed up main board development.

FalconPhy1.0 img2
FalconPhy1.0

Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

Update.

Received processors today so I built one controller of first version. The first version I placed the SD card holder footprint 180 degrees in the wrong direction. Already corrected it for the revision. here are some pics with E131 Phy board option and a couple with Pi mounted on back for Pi input/player option.

IMG 7999   Copy
IMG 8002   Copy
IMG 8006
IMG 8004

Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

very nice going glad too see this coming along


Reply
Page 5 / 7
Share: