Working on a new pi...
 
Notifications
Clear all

Working on a new pixel controller.

33 Posts
16 Users
0 Reactions
8,883 Views
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago

The 500 number was based off of 2811/2801 style pixels @25ms timing. 12 and 16 bit will be less. We have tested that we are able to receive 64 universes of data without much if any CPU intervention, so it just is a matter if we can get the data to the lights. Well we are using one SQI four bit spi port and 4 separate individual SPI ports. Each of the ports has DMA transfer capability so the microprocessor is not involved that much. the only thing the processor is responsible for is transferring and translating the data to go out to pixels. The uC is a 300MIPS processor so it may be up to the job for such high pixel counts.


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

Wow! This board sounds great. Dave has said he is using a brand new micro processor that is just in samples. General availability will be around may. Dave told his chip runs at 300 mips, almost all controllers we use today are around 100 mips. Dave said in his testing the cpu load never went above 5%.

Dave is targeting 16 strings per board, each string can drive 500-680 pixels. Of the 16 strings, the first 8 can each be a different type, the second 8 can be divided and drive two different string types.

Optionally a pi can plug into this card, now u have a show computer and a controller driving from 24-32k channels from a 3x7" board. Everything will fit in a cg-1500 case.

So 5v, 12v. 3 wire or 4 wire strings.

Dave, did I get this mostly right.?

I think dave is targeting kit prices $100-120, assembled boards $160-180.
Final pricing will depend on size of a coop, part availability .etc.

Dave and I talk so he his shared his ideas.

So as a non-hardware guy, someone who has nothing to do with the pi player or the hardware controllers can I again say wow!

Dave is a good friend so take this as biased but what he has done in one year is amazing.

Dave and mykroft wrote the pi player software
Dave has created 8-10 hardware controllers and such in the last 10 months. Find his hardware at falconchristmas.com
Dave knows how to bring in great talent. Capt murdoch, mykroft, materdaddy, timon , komby and many more

Dave, I look forward to the big reveal at the academy. I think I speak for many in our hobby to say thanks to you and the team of people you work with for continuing to push the envelope of our hobby

Thanks!
Sean

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago
smeighan wrote:Wow! This board sounds great. Dave has said he is using a brand new micro processor that is just in samples. General availability will be around may. Dave told his chip runs at 300 mips, almost all controllers we use today are around 100 mips. Dave said in his testing the cpu load never went above 5%.

Dave is targeting 16 strings per board, each string can drive 500-680 pixels. Of the 16 strings, the first 8 can each be a different type, the second 8 can be divided and drive two different string types.

Optionally a pi can plug into this card, now u have a show computer and a controller driving from 24-32k channels from a 3x7" board. Everything will fit in a cg-1500 case.

So 5v, 12v. 3 wire or 4 wire strings.

Dave, did I get this mostly right.?

I think dave is targeting kit prices $100-120, assembled boards $160-180.
Final pricing will depend on size of a coop, part availability .etc.

Dave and I talk so he his shared his ideas.

So as a non-hardware guy, someone who has nothing to do with the pi player or the hardware controllers can I again say wow!

Dave is a good friend so take this as biased but what he has done in one year is amazing.

Dave and mykroft wrote the pi player software
Dave has created 8-10 hardware controllers and such in the last 10 months. Find his hardware at falconchristmas.com
Dave knows how to bring in great talent. Capt murdoch, mykroft, materdaddy, timon , komby and many more

Dave, I look forward to the big reveal at the academy. I think I speak for many in our hobby to say thanks to you and the team of people you work with for continuing to push the envelope of our hobby

Thanks!
Sean

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Well said Sean as always!!

I too am very eager to learn more about this new potential, from what I am gathering this is a quantum leap forward!!


Reply
THurrle
Posts: 1211
(@thurrle)
Noble Member
Joined: 17 years ago

Dave,
Will the uC be pre-soldered for those who don't do SMD?


Reply
dpitts
Posts: 1020
Topic starter
(@dpitts)
Noble Member
Joined: 16 years ago
THurrle wrote:Dave,
Will the uC be pre-soldered for those who don't do SMD?

Yes. The micro-controller will be soldered for all boards, kit, coop and assembled versions.


Reply
Page 3 / 7
Share: