Wireless DIY window...
 
Notifications
Clear all

Wireless DIY window candle...

4 Posts
3 Users
3 Reactions
1,260 Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
[#58589]

3 Replies
Posts: 227
(@ajventi)
Reputable Member
Joined: 10 years ago

love it
what PC boards did you use? Did you connect a pcb to each of the Dumb pixels


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

OMG. Has the store been closed "almost seven years"? Seems just like yesterday. 🙁


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
AJVenti wrote:
love it
what PC boards did you use? Did you connect a pcb to each of the Dumb pixels

The pixel PCB boards are the same ones that you might find in any bullet pixel. I got them from Aliexpress -- they were less than 10 cents each in a flat of 100. There are no dumb pixels in the prop at all. There's only ONE of the boards, and all three of its color outputs are tied together to light a 1-watt LED. Then the data stream goes to a string of 20 seed pixels. This way, regardless of the color assigned to the first pixel, it will light the white, 1-watt LED yet the rest of the pixels will show colors properly. There are 21 pixels in total that make up the candle; I've decided to group them together as a group of 21 pixels so I can set the entire prop to a color with one felled swoop: red, green, blue or white. I won't be animating it (like I showed in the video above) as I actually like the solid colors better, and a bonus for me is that it will take only 3 channels to control the prop (I still use Vixen 2, which is channel-based not prop based). I'll make 8 of them for the 8 windows in the front of our house, and I'll sequence them to match the seed pixels that will be on the bushes also in front of the house.


Reply
Share: