Where do you guys source your Delphi Weatherpack parts from?
mikecentral wrote:Where do you guys source your Delphi Weatherpack parts from?
Mike (Wolfie) says he buys all his from
https://www.waytekwire.com/products/20/Weather-Pack-Connectors/
He posted some pictures from another thread:
http://doityourselfchristmas.com/forums/showthread.php?46199-Pixels-and-where-to-start&p=454383#post454383
What crimp tool would you recommend for the Delphi connectors? When looking*into those I realize I may have*been doing it wrong with the other connectors I was using. The delphis have the wire seal crimped onto the wire. I didn't do that with the ones*I bought on ebay.*Doing a single crimp for both connector and seal sounds great but the tool is pretty pricey.
I used this tool I got from Amazon.
https://www.amazon.com/gp/product/B005K006QS/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
It takes two steps but I couldn't bring myself to pay the big bucks for the one step tool.
The connectors I found on AliExpress. Mine worked well but AliExpress isn't the best at telling you what wire gages the connectors work for. Be careful when shopping there. For a single wire connector (male and female) with all the seals, terminals and connectors, I paid $2.38 for a set of 10. These were sized for 18-20 gage wire. For the 2 wire connectors (male and female) with all the seals, terminals and connectors, I paid $3.20 for 10 sets. Shipping was free. I ordered 50 sets total. I couldn't find a price anywhere near that here.
I got my Delphi crimp tool on Amazon. The price has gone up a bit since I got mine back in 2015. I get my connectors from Ebay.
https://www.amazon.com/gp/product/B00L5KT33O/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Sent from my SM-T710 using Tapatalk
