Notifications
Clear all

WiFi set up

2 Posts
2 Users
0 Reactions
575 Views
WakeFan
Posts: 733
Topic starter
(@wakefan)
Prominent Member
Joined: 19 years ago
[#57297]

Need some input... I've been using the same setup for several years and I'm looking to add wireless pixels and a wireless renard bridge to my set up. Last year when I was testing it looked like my signal was doubled with a lot of interference. I'm sending wireless from laptop to router in yard that is wired to 3 sandevices E682 currently. I think both router and laptop are sending the wireless wifi signal and that's what I'm seeing. I'm using multicast if that matters.

Or should I be looking at something else? Like replacing router with a newer unit, laptop, ect...

If I send wired to router, then send wireless from router would that correct my issues? I'm getting ready to test all this, but thought I would ask if this was an easy answer.


1 Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

General good practise is to have the show player connected to the WiFi AP using a CAT5 connection. Using WiFi can be tricky and you need to be careful how much data you send. That is why FPP is a good choice for WiFi with SD cards on the controllers.


Reply
Share: