Which Pixel Control...
 
Notifications
Clear all

Which Pixel Controller is Best?

41 Posts
25 Users
0 Reactions
21.4 K Views
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago
jem5136 wrote:The display is located in a city park and the city parks department will be purchasing all the equipment, lights, etc. So, when I say "home-made" I mean any systems like the Lynx pixel system. I cannot use it because they cannot be used in a commercial setting. I do not believe that everything has to be UL listed, however if there is a system that cannot be use commercially, such as the Lynx, I will not be able to even consider it no matter how great the system may be.

What is the criteria then? I cannot imagine any criteria that would exclude Lynx but include SanDevices or Falcon.

I assume they're concerned about liability, but they're not going to be able to pass any kind of liability that matters (i.e. electrocution) over to SanDevices or Falcon either, since the high voltage connections happens outside of the board.

Not that I'm a specific fan of Lynx, but what quality does it posses that excludes it from consideration?


Reply
Posts: 2229
(@plasmadrive)
Famed Member
Joined: 15 years ago

I have done commercial installs with both the Pixlite and the Falcon. Both are commercial quality. Neither should require UL if used with class II power supplies. You could power the control board from a walwart (or something like it) and the pixels via class II power supplies. You would need more of them because they can be a max of 100 watts or 5 amps, which ever is lowest. So for 5v 5amp supplies you would only be allowed to use 25watt supplies.. I used 24v supplies in my commercial one that uses the Pixlite and DC-DC converters to get the 5v at the pixels. Inspector said nothing about the installation. Client got his CO without issue.


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago
plasmadrive wrote:I have done commercial installs with both the Pixlite and the Falcon. Both are commercial quality. Neither should require UL if used with class II power supplies. You could power the control board from a walwart (or something like it) and the pixels via class II power supplies. You would need more of them because they can be a max of 100 watts or 5 amps, which ever is lowest. So for 5v 5amp supplies you would only be allowed to use 25watt supplies.. I used 24v supplies in my commercial one that uses the Pixlite and DC-DC converters to get the 5v at the pixels. Inspector said nothing about the installation. Client got his CO without issue.

I think you mean Class 2 (UL1310 - the 100W limited thing). A Class II supply is a double-insulated supply. Technically a standard 5V 60A power supply inside a CG1500 would be Class II - albeit not a UL Listed setup.

But yes, using Class 2 power supplies seems like it would be a much more sane requirement than would be one particular brand or assembly style of pixel controller over another.

Obviously we don't generally use Class 2's, but it would make sense to do so in a commercial install. Painful... but sensible.


Reply
Posts: 1015
(@gilrock)
Noble Member
Joined: 14 years ago

I have my favorites controllers but instead of talking about that I can't help but wonder as I read the initial post what were all the issues you had with the PixCon16? I thought that card was the same as a Pixlite16 and even though I might like a Falcon better I wouldn't say what you had was a bad card. Without knowing what was really going on you may have the same problems with any controller you choose.


Reply
RGB_Mixer
Posts: 270
(@rgb-mixer)
Reputable Member
Joined: 12 years ago

Hi - saw some good info. For what it is worth, I offer my two cents.

I am an electrician, still working, 25+ years with a heavy electronics background in controls and designs. Designed and built many control panels for - well - anything that needs one.

I have two SanDevices controllers. A E682 and a E6804. I also have a Advatek Pixlite 16. I have my own application for long distance props - TTL to RS485 senders and receivers that are optically isolated >2.5kv and use an on-board isolated power supply - super low chance of anything going sideways.

I use SanDevices for my GE Color Effects lights - no one else supports these pixels. I have had several mishaps with both the E682 and E6804 controllers. These have all been testing errors on my part. However, both the controllers have survived - these are more like a Sherman Tank in respect.

All the controllers support all sorts of pixels - my choice is WS2811/12/13 series as they are inexpensive and rather reliable (3 years and going strong). Sure, there are always pros and cons - so I choose what will work for me. All three controllers can act as a DMX bridge - however the Pixlite 16 handles 32 universes plus 4 more universes (1 for each DMX output). I have maxed out all three boards and have not noticed any notable degradation in performance.

I had problems with a Pixlite 16 - the support was fantastic. Both products have always provided excellent support.

The one post I noted was the use of DC-DC converters with a high output 24v supply. Albeit this is a good choice for long distance power distribution (I use them too) many are not electrically isolated. Something to keep in mind. Usually the negative is common to both in and out. There are some that are truly isolated - the cost is higher and the supplier usually states 'isolated' too.

I cannot speak on other controllers as I have not had practical hands-on experience with them.

Good Luck & Happy Holidays, 🙂


Reply
Page 5 / 9
Share: