Which Pixel Control...
 
Notifications
Clear all

Which Pixel Controller is Best?

41 Posts
25 Users
0 Reactions
21.4 K Views
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago
1983ss454 wrote:I know that Jim has his e682's running all the pixel lights on a large Ferris wheel that's a commercial setting in I want to say Maryland, but that could be way off of location. I know it's here in the states

Jim would have to self-insure in order to do that. I know most of us wouldn't want to take a liability risk on someone else's commercial property, and most commercial property owners won't allow a setup that they can't get liability insurance for.

angus40 wrote:Try these 🙂
http://www.stellascapes.com/tough-series

Your real option !

Ahh! Forgot Stellascape was listed.


Reply
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

+1 for the Falcon. I have four of them.

One of them drives a 900 pixel matrix and 4 windows (240 pixels each) and my roof lines and 18 arches (25 pixels per arch) and 7 snowflakes (70 pixels per) and two doors at 150 pixels per door. The other three have similar loads (two more matrices, mega tree, spiral trees, arches, mini trees, candy canes etc.). I have yet to see any sort of lag in the F16V2s (1B & 3R). I also have a few of the ESPixel sticks and some PX1s (not enough ports on the F16s).


Reply
jem5136
Posts: 306
Topic starter
(@jem5136)
Reputable Member
Joined: 17 years ago
deonb wrote:What do you mean by that? If you're limited to UL Listed items then LOR Plug-n-Show and Minleon controllers would be pretty much your only real options.

None of the usual ones we use (SanDevices, Falcon, AlphaPix, PixLite) ship finished devices even capable of obtaining a UL Listing.

The display is located in a city park and the city parks department will be purchasing all the equipment, lights, etc. So, when I say "home-made" I mean any systems like the Lynx pixel system. I cannot use it because they cannot be used in a commercial setting. I do not believe that everything has to be UL listed, however if there is a system that cannot be use commercially, such as the Lynx, I will not be able to even consider it no matter how great the system may be.

From the sounds of it, it seems like the major recommendations are between the Falcon and SanDevices. My setup is a Pixel tree (this year with almost 60k lights, looking to almost double that next year), as well as arches, a C9 outline around the display, RGB star, RGB "Star Poles", 10 RGB pixel trees, and a few items that are either dumb RGB or regular LEDs. Next year the Pixel Tree will definitely expand, the rest of the display is up in the air when it comes to what will change next year. Possibly adding another Pixel Tree, or a matrix, but there will definitely be more RGBs. The Falcon may be better way because there was some thought about using the FPP to run the display next year, however that too is up in the air as of right now.

I appreciate the feed back, however i am currious as to how the Falcons hold up in weather. I'm located in Northeast Indiana and we see cold, rain, snow, and a lot of wind. Of course the controllers will be in enclosures but I don't want wet/foggy air to cause issues (like it already has with the PixCons) when it rains. And I'll definitely need a controller that's easy to set up, that's where a web browser would be best vs. a software (which is another reason I don't like the PixCons, the software never works as intended and LOR doesn't seem to be in a huge hurry to fix it).


Reply
Posts: 205
(@barlav)
Estimable Member
Joined: 11 years ago

Central New York SanDevices E682 user here. Have already been through a major snow storm, wind, large temperature changes and lots of rain since setting up on 11/25. Was a good test for sure! No issues yet and it has been on 24/7 since going live on 11/25.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

San Devices E682 has been used in lots of commercial applications all over the world. So I wouldn't hesitate to use it. The Falcon F16v2r is a solid pre-built controller also.


Reply
Page 3 / 9
Share: