jem5136 wrote:I cannot use any "home-made" controllers, it has to be able to be used in a "commercial" display, so that limits what I can use.
What do you mean by that? If you're limited to UL Listed items then LOR Plug-n-Show and Minleon controllers would be pretty much your only real options.
None of the usual ones we use (SanDevices, Falcon, AlphaPix, PixLite) ship finished devices even capable of obtaining a UL Listing.
I have a variety of controllers and think the Falcon F16v2 gives the most flexibilty. I still use my e682 boards and they are great boards at a great price, especially if you want to build it yourself.
I don't recommend the PixLite MkII as I purchased 2 of them this year and have had problems with both blowing fuses. So bad that I mothballed one and replaced it with a Falcon. None of my other boards have had issues using the same props so it is a PixLite issue. Also having to use their software to configure it is a pain. I prefer just putting the IP in my browser and going.
I have an Alphapix 4 from Holidaycoro and it was behind the times when I bought it and missing some features. The firmware has since been upgraded to add the missing features so I wouldn't bash it. The board is good but I prefer the Falcons or e682's.
Hope that helps.
deonb wrote:What do you mean by that? If you're limited to UL Listed items then LOR Plug-n-Show and Minleon controllers would be pretty much your only real options.None of the usual ones we use (SanDevices, Falcon, AlphaPix, PixLite) ship finished devices even capable of obtaining a UL Listing.
I know that Jim has his e682's running all the pixel lights on a large Ferris wheel that's a commercial setting in I want to say Maryland, but that could be way off of location. I know it's here in the states
Sent from my iPhone using Tapatalk
What determines being the "BEST" controller really depends the application you want to use it for. I have a e682, falcon, and a pixlite MKII each performing to what they do best.
The most flexible is by far the Falcon. Can run lots of different types of elements off the same channel, set them up with virtual strings and inject power where need. you can add expansion boards, long range boards all at a price. You can easily be $400 into a Falcon setup with all the expansions, but with most shows one is all you will ever need. $400 with this controller can be a real bargin actually if your show is spread out...saves the cost of multiple controllers.
If you plan on running a giant Matrix, megatree, both or mutliples of each, the Pixlite MKII is best for you. It can effortlessly process tons of pixels. It is like an e682 on tons of steroids. Doesn't have the flexiblity of the falcon. I have one and love it, for the money I would get the Falcon first if starting out. If are planning run a couple of multi-thousand pixel elements, then this is what you want. The Pixlite MKII Long Range (I don't own one) can also give you tons of location flexibility with high pixel counts (just no virtual string flexibility but cheaper than the falcon). Falcon is stating that the V3 will be able to process the pixel qty as this board. Could change my opinion a bit.
The e682 in my opinion started it all for most of us. Inexpensive and reliable. Really the first reliable controller. the new firmware does make it more flexible. I would not recommend buying one that is assembled, because the price is similar to a Falcon.
