Hello,
I am looking to switch pixel controllers for next year. Currently I am using the LOR PixCon16 (I have 7 of them) and I am done with them. I have had nothing but issues with them since the day they arrived, so I am looking to move onto a better, more reliable controller.
I am looking for everyone's opinion on what you think would be the best controller, the display I am running is actually ran by the parks department in the town I live, so I cannot use any "home-made" controllers, it has to be able to be used in a "commercial" display, so that limits what I can use. My only requirements are that each output can handle up to 5 amps (that is about what my pixels draw when they are solid white), set up is some-what simple, and the boards are reliable.
I've thought about SanDevices or PixLite, but I want to hear success and failures from different controllers so I know what I'm up against.
Any help would be appreciated.
Thanks
Jesse
I can only speak from my experiences and I've had excellent luck with my sandevices boards, the only thing with sandevices is that they are behind the times and an older design. A lot of your newer controllers the falcon's, Ect have a lot of improvements in certain things. That's not to take anything away from johns stuff, I have 7 of his boards and will still be using them next year
Sent from my iPhone using Tapatalk
Falcon, but thats my opinion and your needs may be suited for something else
F16V2... or wait until spring for it's successor F16V3. I don't have experience with HolidayCoros AlphaPix line, but I mothballed my SanDevice E682 and bought another Falcon. They're more flexible, support further wire distances out of the box (the data line), have a slick/modern web interface for config (that works well on mobile also), and have been 100% stable for me year 1 at least. While the E682 worked, I felt I had to do more overall design and maintenance to get it ready: clunky firmware update, needing to use more null pixels, clunky web interface. In summary, if you don't want to do a ton of research, this is a highly capable controller, it will inherently eliminate "to-do" items as you implement your system. If you want to do a research, it's very likely this ends up in your final few choices anyway. I can't imagine you get it and wish you had something else. I may sound like a fanboy, but it just made things easier which became priceless to me as the year's hourglass went by.
Also that's the big board, they have a 4 channel version too.
Comparison chart
http://nutcracker123.com/nutcracker/rgb_controllers/
If the chart for PixLite is accurate, it sounds like software is needed to configure it. Not the end of the world, but web config is so handy.
