Waterproofing Pixel...
 
Notifications
Clear all

Waterproofing Pixels

34 Posts
13 Users
0 Reactions
7,122 Views
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
1pet2_9 wrote:I just got a monsoon the night before and my [round] pixels were the most reliable part of my display. My lovely night consisted of debugging ground faults in the AC in the mud. Lots of drive-by's, and all they got to see was the pixel portion. I should try some of this same epoxy, resin stuff you all are recommending on my AC's.

Yeah my 7 Renard AC's and their associated ground faults in the wet are the real reason I power down in the rain.....They're on different breakers and it's odd to go out in the yard and see half the AC stuck on in the last pattern when a previous Renard on a different breaker kicks the breaker off..... Thank goodness for GFCI..

Tonight I went out....been dry for 4 days now and the topper on my 20' MT has lost the outer ring of pixels.....Like I said in an earlier post....Why is it always a pixel in a location you can't get to??????


Reply
Posts: 52
(@davwav02)
Trusted Member
Joined: 13 years ago

I had an issue with some of the connections getting water in them and found that hot glue, while messy, does seem to keep water out. I'm not sure how helpful that may be with entire strings of lights, but it was something I had never thought of before having moisture issues this year and figured I'd pass it along, in case it could help you or anyone else.


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago
Santacarl wrote:Yeah my 7 Renard AC's and their associated ground faults in the wet are the real reason I power down in the rain.....They're on different breakers and it's odd to go out in the yard and see half the AC stuck on in the last pattern when a previous Renard on a different breaker kicks the breaker off..... Thank goodness for GFCI..

Tonight I went out....been dry for 4 days now and the topper on my 20' MT has lost the outer ring of pixels.....Like I said in an earlier post....Why is it always a pixel in a location you can't get to??????

You're betraying yourself as an imposter. The real Santa would just get his reindeer to help get up there.


Reply
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
1pet2_9 wrote:You're betraying yourself as an imposter. The real Santa would just get his reindeer to help get up there.

:biggrin:


Reply
Posts: 459
(@shockwave)
Reputable Member
Joined: 15 years ago

I have a almost perfect waterproofing -- Clear Polyurethane

Simply take a syringe of it and dribble it onto the pixel. It wicks far better than water does, so it goes wherever water will. This dries and prevents water intrusion through the tiny cracks and crevices. The only negative, is it cracks with age and sun exposure. You will have to reapply it every 2 years or so. But it takes nearly no time to do.


Reply
Page 6 / 7
Share: