I just had the same problem with pixels I bought from a well known supplier 2 years ago. It rained a little bit the other night and when the show was over, I went out to make sure all the lights were out. There were random pixels flashing different colors on the mega tree. The only way I could get them to stop flashing was to unplug the power. I plugged the power back in the next day and they were still flashing. I could see moisture inside the bullets. I took a heat gun and started blowing all the pixels with hot air and was finally able to get them to stop flashing. Of course I burned one of my pixel holding straps in two and had to repair that. Fortunately the next night all pixels worked properly on the tree. Now the bad news. It is raining again tonight so I just shut the show down and disconnected power to everything. Now I will just wait and see what happens tomorrow night.
kenoman742 wrote:I just had the same problem with pixels I bought from a well known supplier 2 years ago. It rained a little bit the other night and when the show was over, I went out to make sure all the lights were out. There were random pixels flashing different colors on the mega tree. The only way I could get them to stop flashing was to unplug the power. I plugged the power back in the next day and they were still flashing. I could see moisture inside the bullets. I took a heat gun and started blowing all the pixels with hot air and was finally able to get them to stop flashing. Of course I burned one of my pixel holding straps in two and had to repair that. Fortunately the next night all pixels worked properly on the tree. Now the bad news. It is raining again tonight so I just shut the show down and disconnected power to everything. Now I will just wait and see what happens tomorrow night.
Yup, I feel your pain..... I've even had some start working after the display was up and running for a while....I guess the moisture 'dried' up under load....but I mark the 'bad soldiers' and replace them the next day...because the chances of them failing again seem pretty high..... This is what happens when you outsource production in the search for 'cheap' products.....Well, we shouldn't be surprised that when you do that you get EXACTLY what you wished for.....CHEAP JUNK.
1pet2_9 wrote:Where are the pixels failing? Are they sitting in small pools when it's wet, or the roof's dripping on them? Or are we talking on the windows and halfway up.the mega tree?
Mine are in my coro candy canes and corro spinners.
Good news (I hope) There is no more rain forecast for where I live until after Christmas. 🙂
kenoman742 wrote:I just had the same problem with pixels I bought from a well known supplier 2 years ago. It rained a little bit the other night and when the show was over, I went out to make sure all the lights were out. There were random pixels flashing different colors on the mega tree. The only way I could get them to stop flashing was to unplug the power. I plugged the power back in the next day and they were still flashing. I could see moisture inside the bullets. I took a heat gun and started blowing all the pixels with hot air and was finally able to get them to stop flashing. Of course I burned one of my pixel holding straps in two and had to repair that. Fortunately the next night all pixels worked properly on the tree. Now the bad news. It is raining again tonight so I just shut the show down and disconnected power to everything. Now I will just wait and see what happens tomorrow night.
I had to do the same on my candy canes and slowly dry them out rather then replace them as I had time to dry them before the show started.
