Thoughts on outlini...
 
Notifications
Clear all

Thoughts on outlining windows with pixels.

7 Posts
5 Users
0 Reactions
3,531 Views
Posts: 319
Topic starter
(@dalep)
Reputable Member
Joined: 10 years ago
[#52318]

I bought some chromastrips to use for mounting pixels around my windows and am having some issues with them. I'm mounting the strips to 1/2" PVC and planned to bolt an angle iron to the top so it could slip into the J channel on the windows. Trouble is I'm mounting the lights at 2" increments and the extra wire in the back is taking up a lot of room. Right now I'm going to have to mount the PVC pipe around 2" away from the wall to accommodate the extra wire.

Is anyone else having this issue and if so what did you do to work around it? I would love to see some pictures showing other ways to mount pixels around windows and doors. My original plan was to drill holes in the PVC for the lights, but I had the same issues with too much extra wire coming out the back and the wire would actually push the pixel out of the PVC when it was pressed up agains the house.

Thanks for the help! Dale P.

100
200

6 Replies
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago

I have a similar condition although maybe not as much extra wire as you do. I ended up cutting short pieces of PVC which I zip tied to the main PVC pipe at the attachment points. These serve as standoffs to provide enough space for the wiring.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

At my previous home I was renting and not allowed to make holes. I built legs that I painted the same color as the wall and stood the frames up in front of the window. The point is, the extra space was not noticeable. My viewers were about 30' from the windows.


Reply
Barnabybear
Posts: 1583
(@barnabybear)
Noble Member
Joined: 15 years ago

Hi, does it help you fold back the centre of the cable? Making a \_/\_/ shape between the pixels instead of the \____/ that you have now.


Reply
Posts: 319
Topic starter
(@dalep)
Reputable Member
Joined: 10 years ago

Not really, and it puts a big strain on the wires.


Reply
Page 1 / 2
Share: