Finally got my Renard Plus Wifi controller built and working. Hooked up my first string of pixels and began playing with the possibilities in Vixen 3. What do you guys run for test patterns and is there a quicker and easier way than hooking it up to the PC and outputting through the Vixen software? How long do you let them run before it is decided that all is good with them and begin building projects with them? Thanks again!!!
Hello Rooster,
I use one of these - http://www.ebay.com/itm/24key-Color-IR-Remote-RGB-LED-Pixel-Controller-for-WS2811-WS2812B-Strip-Light-/311666226662?hash=item4890c135e6:g:W50AAOSwn8FXRyzl
I use this with a small pc power supply so that I can run-in any new 5v or 12v pixels. After I have built an element I also use this mini controller to test it.
Hope this helps. Cheers.
Taz.
Hello Rooster,
Are you asking about testing and running-in new pixels? If so, do an Ebay search for "ws2811 ir remote" and it should list some mini controllers with an IR remote. It generates loads of different colours and a limited number of preset sequences. I use one of these with an old pc power supply so that I can easily test 5v and 12v pixels.
Hope this is of use.
Taz.
Taz, That's exactly what I am looking for. An easy way to test new strands to make sure all LED's function. How long do you let them run for? I've seen a few people saying at least 6 hours, but other saying over 12.
Glad I was on the right track! I run every new strip or string for 12 hours. After I have built an element with them I test them again for another 6 hours or more. The mini controller and a pc power supply make a really simple and compact test setup. I usually just use the white meteor effect so that all the leds get a good run-in and any fauly ones are easy to spot.
Cheers. Taz.
