MindTrik wrote:Any updates on the new ones yet?
Ray sent me a 12V sample string last month. I am not sure where these stand in the order of re-design, but he said it was the "new pixel design". It was plugged in on 1/18/14 to a E682 running test pattern 16. Besides one quick 30 second power outage and one 17 hour power outage, they have been running non stop, 24x7 so far without a problem, so far. They have been buried in snow, rained like hell on (standing water), in low 20's weather, dry weather, all in that time. Take it for what it is worth.
How much power were you running to theses thouse traces look like there about 1mm or less that would be 2 amps on a pcb thats open to air theses are a bit less that is not helping with the heat issue. Even with 2oz copper its about 3 amps seams kinda low to me. And you will want to run as far under that max rating as you can at min %80
Are theses failures on the first few pixles or later down the chain?
So an update on these pixels. On Monday, after more than 2 full months of 24x7 operation, I had the first failure of the string. One pixel failed. It was stuck on green, and all pixels down string stayed at the last color instruction they were sent. After cycling power, that pixel and everything down string is unlit. I am keeping them lit until this weekend when I can cut out the failed pixel and see how she works again.
Maybe send that pixel over to Steve for some analysis.
Failed pixel is cut out and the string is back working. If Steve wants to evaluate it, I would need him to give me his address in a PM.
Part of the testament to this experiment is the E682, albeit there is not much load on it, but it has held up in the weather running non-stop as well. There is a Meanwell Power Supply cranking away too.
Since Jan 18th, there has been 3 times the power has been cycled. I guess the next test should be to put the controller on a timer and have it now cycle several times a day.
