Technicolor quality...
 
Notifications
Clear all

Technicolor quality?

256 Posts
45 Users
0 Reactions
83.4 K Views
Posts: 95
(@danolgb)
Estimable Member
Joined: 17 years ago

I'm just surprised that's all. I've never encountered stranded aluminum with that small of a gauge. I haven't seen any wire offered that's stranded of that gauge in aluminum. I see some solid, but not stranded. Aluminum has a much lower tensile strength than copper and so I would think it would be difficult to get it down to such a narrow gauge without breaking. Sure, foil can be really thin, but foil is compressed, not drawn like wire. I've also just seen a lot of tinned copper electronic wire. At small gauges it seems to be quite common and I've seen it all the time on cheap audio cables out of China.


Reply
dsmjuggalo
Posts: 663
(@dsmjuggalo)
Prominent Member
Joined: 15 years ago

I received some of the new technicolor pixels today. I plan on hanging them from the roof out back this weekend and seeing how they do outside. They appear almost identical to the others except for the ws2811 in the mold. They are even the exact same size.


Reply
Posts: 95
(@danolgb)
Estimable Member
Joined: 17 years ago

I did some more research on the wires. Yes, mine are silver as well, but I checked the markings on the wire (1007 VW-1 80C 300V 20AWG FENGDA) and everything I read leads me to believe it's tinned copper.


Reply
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago

Makes me wonder if the actual copper is thinner (cheaper) and tinning the wire adds up to be overall 20awg...

danolgb wrote:I did some more research on the wires. Yes, mine are silver as well, but I checked the markings on the wire (1007 VW-1 80C 300V 20AWG FENGDA) and everything I read leads me to believe it's tinned copper.

Reply
Posts: 214
(@gary-martin)
Estimable Member
Joined: 18 years ago
danolgb wrote:I did some more research on the wires. Yes, mine are silver as well, but I checked the markings on the wire (1007 VW-1 80C 300V 20AWG FENGDA) and everything I read leads me to believe it's tinned copper.

Yes, according to the stats on the Fendgda site I'm wrong and that is tinned copper but I sure can't see even a hint of copper in the wire. The reason I was so sure it was aluminum was the condition of this string that came off a local user's house. The Fengda site does indicate that's a PVC insulator on it and it's indoor rated only.

The string of 25 TC pixels that came off of Lee Howe's house showed signs up and down it of the wire insulator melting in numerous places. The pixel that failed on the string had actually melted off the insulation around the wire at the base of the pixel. Inside the pixel, it looked pretty severe, the LED leads were desoldered from the PCB, one PCB pad actually came free of the PCB and was still attached to the wire. Well here, pictures speak louder than words:

Note: these are high res pics on Flikr

Typical insulator melted damage:

Severe melting around bad pixel:

Next post will show the opened bad pixel.


Reply
Posts: 214
(@gary-martin)
Estimable Member
Joined: 18 years ago

Here's the rest of the pictures I got from the thermal failure TC string:

First for reference, here is a good TC pixel after opening the injection molding with a Dremel and box knife:

The rest of these pics aren't as pretty:

Opening the burnt pixel:

One last shot of a good pixel:


Reply
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago

Those look like short circuit thermal runaway.... wow...


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
Roterhead wrote:Those look like short circuit thermal runaway.... wow...

wow is right - wow!


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago
Roterhead wrote:Have to be careful about current flows in the DC vs AC world.

AC flows only in the outer circumference of a wire (called skin effect), something to do with actual electron flow and migration. In very high frequency systems hollow tubes (waveguides) are used as current is only flowing in the skin of the conductor.

DC flows throughout the conductor thus cross section area needs to be looked at.

Exactly. However the skin effect is minimal for small cables at low AC frequencies. In any case, being highly stranded would not allow a less than 18Ga wire to act the same as an 18Ga wire in the pixel context (from referenced claim in some earlier msg in the thread).


Reply
MindTrik
Posts: 1542
Topic starter
(@mindtrik)
Noble Member
Joined: 16 years ago

Any updates on the new ones yet?


Reply
Page 20 / 26
Share: