Anyone have technical drawings showing nominal dimensions for the bullet as well as the flat pixels? I got some ideas I want to try with the laser cutter and don't have any pixels in hand at the moment.
Also, does anyone have a technical drawing of the CG-1500 enclosures everyone seems to use? I would like the screw placements as well as internal dimensions to cut out some backplane boards ready to rumble when I get some gear.
Drawings for the pixels? That's funny. You think they're all the same?
All kidding aside, the only dimension you can count on with the bullet and square pixels is the hole diameter. Everything else varies quite a bit. Sometimes even in the same string.
I thought I saw drawings for the common CG boxes somewhere on the wiki. If you can't find it there those should be easy enough to get from the manufacturers too.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
I posted some drawings here a while back: http://doityourselfchristmas.com/forums/dynamics/showentry.php?e=35&catid=17
I know the 1500 has changed from this drawing however - the hole placements are all different so you may want to keep hunting around. You might check the vendors sites at DIYLEDExpress.com or RadiantHolidays.com - they might have them somewhere as well...
Funny you should ask 🙂 I just drew up some CAD models of WS2811 Bullet Pixels from Ray Wu last night haha.
Here you go: https://grabcad.com/library/ws2811-bullet-pixel-1
James (MrRocketman)
MrRocketman wrote:Funny you should ask 🙂 I just drew up some CAD models of WS2811 Bullet Pixels from Ray Wu last night haha...
What CAD program do you use?
