Monoprice has awesome pricing on zip ties too. Especially if you need multiple thousand 4" ones!Sent from my iPhone using Tapatalk
Pretty sure my pixel wires are 20-22 AWG. They are just standard 5v square pixels from Ray. Although I"m going to request 18 AWG for my next order. Bu...
Just ran some tests and my numbers are very similar. 50 5v 22 AWG square pixels from Ray 0% Brightness 49mA (IC current draw) 100% Brightness (White...
You would probably be better off if you daisy chained the data lines. So one output of the controller feeds data for as many pixels as possible (340 p...
MartinMueller2003 wrote:For the past two years I have used 60/M WS2812 5v strips. I had so many issues with them this year that I will be removing alm...
jasper9 wrote:What tends to break on them? I had strips as well. WS2812's. And they failed miserably. Failed left and right for no reason. And are a...
toozie21 wrote:Do you have any pics or posts on your P10, I would like to see it. Anything you would do differently? Here's a quick one without the...
Don't forget the small things, like spade crimps and extra terminal blocks. The power wires for each panel aren't very long, maybe 18". So you'll have...
dotless wrote:Wow I'm new to this and was about to order a bunch of ws2012b strips but now i'm having second thoughts. Would the failure rate be much ...
Same issue here as well. Lost probably 100 pixels last year. Ordered some new ones from Ray, tested them for a week, and every roll had failures. I've...
That was a single strand effect (more specifically a "skip"). This was before you could change the render style though so I created a separate model t...
Very nice looking! All those ghosts look really nice! The only real difference with what I had was adding in the images for each syllable to the Megat...
Hey, I think I ended up changing the face a little bit if I'm remembering right. Here's the image files I was using. Then I just used XLights built i...
Yeah I just drilled some slightly undersized holed and then tapped in the nails into the clamps that are holding the strips. Worked just fine. I tried...
whitebuck wrote:I know I am late to the party. Would you mind sharing some more detailed photos of how you mounted your matrix and the frame? Thanks...
