Well I had tons of 30/30 5V pixels from Ray crap out. Definitely seems to be related to the WS2812 chip. Mine seemed somewhat related to the cold like...
I ran my entire show off of my custom Particle Photon WiFi controllers this year. I had 10 different controllers controlling a combined ~6100 pixels (...
You'll want to turn the "skip size" to 0 if you don't want a blank space between your red and greenJames (MrRocketman)
Just had to take my website down for the evening. I host my website from my home computer and there was so much traffic it was bogging down my light s...
Ask and ye shall receive! I just added some more photos of the little tree wheels as well as the MegaTree to my blog post. James
I've just added a bunch of details about the show and elements here:
The matrix is built with 5V bullet pixels and the holiday Coro 2" mounting grid. 4ft x 4ft each. Power injection on each row. Then a simple PVC frame ...
Thanks, I used XLights for everything. The faces were done with the faces feature built into XLights. James (MrRocketman)
I have had the same problem with some of the same strips from Ray. Brand new strips this year. Was just getting them all up on my house when this star...
Okay so I finally figured out the issue with the lag. It was a combination of issues. Poor wireless signal and QoS. So I have external antennas on a...
Funny you should ask 🙂 I just drew up some CAD models of WS2811 Bullet Pixels from Ray Wu last night haha. Here you go: James (MrRocketman)
I could use some ideas... I can now successfully control pixels using the photon. The photons are hooked up over WiFi to my home network. I have a Ra...
Can confirm. I plugged in my 250 pixel Star (WS2811 5V Bullets from Ray Wu) to 12V cause I'm dumb. Cut out one at a time and I only lost 8 pixels. Min...
Interesting, can I ask you which strips you have specifically? A link to where you bought them would be great, so I can keep track. James (MrRocketman...
