Notifications
Clear all

Snowmandan

4 Posts
3 Users
0 Reactions
1,508 Views
Posts: 10
Topic starter
(@snowmandan)
Eminent Member
Joined: 11 years ago
[#40144]

Extra new new be as you can tell by this post
My first order of pixels has arrived but not the controller can I test them with DC 12 v to see if they work wanted to check them b4 I leave feed back on eBay.
Thanks for the help


3 Replies
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

Hooking up a source of power will not turn the lights on. Pixels require a data signal.

FYI -

Just so we are on the same "terminology".
A "LED" contains (usually) 3 elements. A red, a green and a blue element.
A "Pixel" contains a control chip, and one or more LEDs. (Bullet nodes have just one LED, where strips may have 3 per control chip. Some have other LED layouts, such as Pixabulbs which have 2 LEDs for each "Pixel".

Power is applied to the pixel strip/string/matrix to supply the chips as well as the led elements themselves so they can do what they need to do.

A chip in each pixel then waits to be told what to do by a control-data-stream. When it receives it, the first instruction is used to set the intensity of the first element. The second goes to the second, the third to the third. In most pixels those three instructions are stripped out and the rest of the stream is then passed on to the next chip. This happens all the way down the pixel strip/string until the message is consumed.

You will need something to send this data stream to the pixels. A "controller" does this. There are many good controllers, and that needs to be addressed in a different thread.

May I suggest some resources to help your understanding of using pixels... The wiki on this forum is the first. The http://www.auschristmaslighting.com "101 Manual" is a great resource for beginners and experts alike. Even if you use another controller, check out http://www.sandevices.com/aboutrgbpixels.html .


Reply
Posts: 10
Topic starter
(@snowmandan)
Eminent Member
Joined: 11 years ago

Wow that was fast.... thanks for the reply
I do have 2, 682's ordered just haven't arrived yet
Looks like I won't be playing with lights for Christmas 🙁
Guess I'll just have to keep reading posts.
And after reading what a supporting member is I will be signing up


Reply
Posts: 317
(@spyder)
Reputable Member
Joined: 11 years ago

Your in a great position. Lots of time for learning and experimenting for your first show.

Good luck.


Reply
Share: