Replacing a bad pix...
 
Notifications
Clear all

Replacing a bad pixel quickly?

25 Posts
10 Users
0 Reactions
7,039 Views
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago

AFAIK, none of the Wagos are weather rated. They are designed for indoor and enclosure situations. But, to get your show lit for a short term, what the heck, its not like you are screwing with 120 or 240 ac.


Reply
Posts: 911
(@madsci1016)
Noble Member
Joined: 12 years ago

I'm hooked on those solder sleeves this year. What a time saver. Bought a new heat gun just to make it go faster. 1200 Watt heat gun + solder sleeves + automatic wire strippers = 5 minuter repair in place. Bonus the heat gun excess heat can keep your fingers warm!

But I live in Florida. So I don't have a problem being outside this time of year....


Reply
Posts: 277
(@blake-l)
Reputable Member
Joined: 19 years ago

These look interesting... could you share source / links?

Wolfie wrote:I used strips for the window frames and the arches. Other stuff is pixels.

The delphi connectors I am changing over to from pigtails are these:

I have 2p and 3p shells and pins form 20ga up through 10ga. The connectors/pins are good for 20a (obviously limited by the wire gauge you attach). Zero soldering. Simply crimp on. It takes me roughly 1/4 of the time to attach a pair of these as it does to attach a pair of pigtails with all the solder joints and heat shrink. They are completely weather proof. And you can remove the wires with a simple tool and recover all components other than the crimped pin which is very cheap. Each pixel string on my tree will have these on the ends. Male on the data in end, female on the data out end. Simply plug them togher at the top or into the harness (with power injection via 2p plugs) at the bottom of the tree. The 2p ones are about $1.50 a pair (all components). The 3p slightly more. So they are comparable in price to pigtails but offer a lot of advantages (your own wire, pick and choose wire gauge even in the same connector, no heat shrink, no soldering, year round availability, etc).


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago
blake_l wrote:These look interesting... could you share source / links?

I reviewed these along with some other items from waytekwire.com here:

Full links in the description. Their website sux but they have good prices and fast shipping.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

Here's that full pair splice. You'd need two for a 3 or 4 wire pixel. So that saves a splice. Plus they're inline so you don't lose length or form factor.
http://m.3m.com/wps/portal/3M/en_US/NA_Communication_Technologies_Mobile/Home/Products/Catalog/~/3M-Scotchlok-IDC-Full-Pair-Drop-Pair-Inline-Connector-U1B-Box?N=7569738%203294749620&rt=rud&MDR=true

Sent from my iPhone using Tapatalk


Reply
Page 3 / 3
Share: