Pixel string tree?
Wolfie wrote:Pixel string tree?
Yeah , this is a tree shaped prop that is comprised of pixel strings .
Commonly refferred to as a mega tree or mini tree ! lmao
Well, yea, thats what most of them are. No?
Mine is 24 strands of 60pixels each. This year they are mounted in boscoyo strips. But if you build it right with connectors at each end of the strands (rather than soldering it all together) then there is little downtime no matter how you mount/hang them. Unplug a bad string, plug in the backup and off you go to repair the bad one inside. It becomes your backup then.
The ASAP or JUMP make that process very easy.
Ah , that sounds like a great tree you have . . I thought you had a strip tree and were serious about the string ?.
My tree has a hand crank and would be a chore to bring down for string replacement during show time .
Having doubts I will put much up this year . I am hoping to at least get this matrix operating smoothly .
I used strips for the window frames and the arches. Other stuff is pixels.
The delphi connectors I am changing over to from pigtails are these:
I have 2p and 3p shells and pins form 20ga up through 10ga. The connectors/pins are good for 20a (obviously limited by the wire gauge you attach). Zero soldering. Simply crimp on. It takes me roughly 1/4 of the time to attach a pair of these as it does to attach a pair of pigtails with all the solder joints and heat shrink. They are completely weather proof. And you can remove the wires with a simple tool and recover all components other than the crimped pin which is very cheap. Each pixel string on my tree will have these on the ends. Male on the data in end, female on the data out end. Simply plug them togher at the top or into the harness (with power injection via 2p plugs) at the bottom of the tree. The 2p ones are about $1.50 a pair (all components). The 3p slightly more. So they are comparable in price to pigtails but offer a lot of advantages (your own wire, pick and choose wire gauge even in the same connector, no heat shrink, no soldering, year round availability, etc).
We used 3M UR connectors by the box car load in telephone cable splicing. They even have them in cartridges.. load them into the tool and fire away.
I don't believe they are recommended for use on stranded wire.. but in a pinch.. when its freezing outside.. I'd be tempted to try it.
I'd get the jell filled UR's or UY's. Best to use right crimping tool, something like an E-9Y.
Lineman's pliers will sorta work. It needs to have a broad flat squeeze or the button will pop out and ruin the connector.
To release the connector, squeeze the sides and the button will eject.
-Craig
Reddy_Kilowatt wrote:We used 3M UR connectors by the box car load in telephone cable splicing. They even have them in cartridges.. load them into the tool and fire away.I don't believe they are recommended for use on stranded wire.. but in a pinch.. when its freezing outside.. I'd be tempted to try it.
I'd get the jell filled UR's or UY's. Best to use right crimping tool, something like an E-9Y.
Lineman's pliers will sorta work. It needs to have a broad flat squeeze or the button will pop out and ruin the connector.
To release the connector, squeeze the sides and the button will eject.
-Craig
They also make full pair inline splices in this series. This splices two conductors at once and does it inline rather than all the wires coming out the same side. They're less common and a bit more expensive. But it saves a few more seconds of frostbite.
Sent from my iPhone using Tapatalk
WayneKremer wrote:Wow...I see an opportunity for someone here to make $$$. Create a waterproof thumb press inline wire splice.
I've often wondered why they don't make those. These type of "3M Scotchlock" connectors are great EXCEPT for all wires going in the same end. I use them for other things, but not in pixel strings for this very reason. If they ever start making them with an in-line configuration I'll buy a butt load 🙂
The issue with quick splicing multiple in a single package is potential for shorting . Without a sure water tight seal , there is sure to be some water ingress or condensation with these thumb press connectors .
Wago makes some great connectors also .
http://www.mossled.com/products/wago-spring-loaded-quick-connector-221-415?variant=25098504200
I have done a bunch of solder sleeves this year and I don't see that they stand out significantly compared to heat shrink tubing. It is bigger, but not significantly...

