fathead45 wrote:jw since you said you got the square flat pixels, were they the epoxy filled or the injection molded?
Could you describe the difference between epoxy filled and injection molded? I'm not sure how to tell which is which...
griffixdc wrote:although it sucks from what i have read, most if not all Rays pixels are repairable just solder flow issues
Could you say more about how you repair the pixels? The pixels I have are encased - cracking the shell and resoldering would then require some new waterproofing. Are you talking about strips, or...?
I went with these this year - bought over 3000 pixels this year and so far only one bad pixel. I had lots issues with flickering but trouble shooting proved it was not the pixels, rather the installation wire used and power induction.
Isn't it true that when you purchase from a vendor in the U.S. you still getting the basic same product "made in China" as not much is truly made in the U.S.A. anymore. Looking at other vendors sites that are here in the states I am seeing the SAME lights we purchase direct from China. Minleon RGB??? Went to their web site and found no lights. I am looking in the wrong place maybe.
I be back purchasing more of the same lights from ray next year as they have worked out well for me. It does seem like some light designs are made better than others, I know most are made by different companies in China and that seems to be were the quality has a big difference. Some do a good job and some just STINK at making lights.
MindTrik wrote:Belden item 709SC They do require that you wallow out the hole and it's a tight crimp...but they work!
Not sure what you mean by wallow out the hole - do you have to use an awl or something to increase the size of a hole?
I notice that the 709SC seems to be for 22-26 ga wire, and some of the strings use 20 ga (some premium ones even use 18 ga). Is that why the hole needs wallowing?
Xmaslight wrote:
Isn't it true that when you purchase from a vendor in the U.S. you still getting the basic same product "made in China" as not much is truly made in the U.S.A. anymore.
Well for pixel lights like these, yes pretty much all of them will be made in China - tho as unquoted parts of your post indicate, you realize that some factories and some designs are better than others there.
One thing that some US vendors do is carefully spec out what they order (in quantity) from the Chinese vendor. For example that could include less obvious things like wire gauge or UV protection or connector quality. Then they may test sample for quality and respec if need be. And then when they get orders in, some may do some QC and return the batch if it has bad quality - as well as stocking spares for quicker replacement in the case of individual problems. All of that adds markup, but it can help you get a more trustworthy product. I don't know how many of these things a given US vendor does for a given product (tho some have discussed such things now and then, which is where I'm getting this) - I'm just pointing out that there is potentially some real value added in going through the higher quality US vendors EVEN IF it still comes from China and superficially looks similar, and the increased price may be no rip-off.
Whether that value added is worth the cost added is up to the buyer. I've used both routes. But if I go for the lowest possible price, I recognize that I'm taking on more of the risk myself.
