Notifications
Clear all

rays pixels

109 Posts
36 Users
0 Reactions
27.8 K Views
Lionking_Tx
Posts: 780
(@lionking-tx)
Prominent Member
Joined: 15 years ago

I think I mentioned it before, but my last order from Ray Nov 2012 was just horrible.
Right out of the box I had to replace several Pixels and even more 5050 Dumb ones.
This year I just started testing/putting out lights last weekend and already had to replace another 28 Dumb LED's....haven't even started testing the Pixels for the tree and roof yet.

Yes, Ray is cheap but I'm at a point where I don't really see the benefit of saving a few bucks while spending hours fixing bad pixels/LED's.

I wish there were some alternatives with better quality - and nothing against local vendors, but they get their pixels from the same guys Ray buys from.

Anyone has more informaion about Mineonlights like Pixel Types, prices etc ? Scanned their page, but couldn't really find this info.


Reply
Posts: 311
(@neilric99)
Reputable Member
Joined: 17 years ago

Stellascapes and Minleon both have very good quality and supported rgb light strings. Ok they are not in the same price point as the cheap ones we get from China but they are guaranteed to work and my time is much more valuable to me than having to spend it fixing dead pixels.


Reply
Keebler
Posts: 1691
(@keebler)
Noble Member
Joined: 17 years ago
angus40 wrote:out of curosity , what pixels are they from Ray that you are having issue with ?

I have purchased 5k pixels from Ray and only 1 Pixel had a bad solder issue .

I purchased 800 rgb from a North American vendor / Diyc supporter and all of them are bad .

as some one else stated each will have different experiences .

I for 1 will continue to purchase from Ray >> 🙂

me too.
i have bought well over $3000 in pixels from Ray, only had 5 strings (of 128) be messed up, but only 2 strings just be unusable (too many messed up) from not soldered, to wrong wires, to pixels in backwards.

this last order so far the pixels have been fine (ive not checked them all yet), the only problem is he thought that i had ordered wrong when i ordered a pair of 5v power supplies, so he sent me 12v (since all the pixels i bought from him were 12v), but the ones i have from Todd are 5v. lol. he is sending the replacements out today.
i told him also of our concerns regarding communication when he makes promises about shipping.. we would all like it better if he told us before that days if he is not going to make shipping date. he said he understood.

while i get frustrated with the shipping dates getting pushed back and pushed back, hte bottom line is for the sheer volume of product he handles, there are bound to be a few mess ups here and there... the REAL issue is what does he do about it? if he makes it right as soon as possible - i am ok with that.. if he were to blame someone else like the customer - id be done with him. (gladly he does not do that). he fixes it.
and my guess is, that is why he is so busy... so many of us ordering from him - push him further and further behind... lol from a business point of view, that is the BEST place to be (too much business).

anyway, just thought i would add my 2 cents


Reply
Posts: 792
Topic starter
(@boarder3)
Noble Member
Joined: 19 years ago

Like said I have some 3 year old pixels fro m ray those are better than both new batches and they are the exact same poxels. Even of the poxels are cheaper by half what good are they if they only last one or two seasons. At most. Not sure where you live but in northeast we gey snow and that puts a lot of water that's sits there all day.


Reply
Posts: 853
(@roterhead)
Prominent Member
Joined: 15 years ago

Ok, where are people buying ws2811 strip pixels if not from China?


Reply
Page 8 / 22
Share: