For all you math majors out there, a quick quiz.
35' tall megatree. 32 strands in a 360 degree pattern.
100 pixels per strand.
Pixels are WS2811 "bullet" style. 12 volt DC.
How much power does the above pull at full on, white?
18.5mA * 3 colours * 100 pixels * 32 strands = 177.6 Amps.
In reality I'd bet closer to 133 Amps.
Based on the .06 amps per bullet that is fairly standard for planning purposes, you'd be looking at approx. 6 amps at 12v per string for a total of 192amps. Thats a BIG tree!
Yep. It is a big tree.
We were having fun with numbers here, and came up with about the same thing. Around 170 Amps. Now I have to get some of those "bigger" power supplies, instead of our standard units (Meanwell and generic). Of course I'm not going to run it at 100%, but I've always been fond of having the ability, just in case I go wild sometime.
Thanks to both of you.
Al
BTW, the tree sits in the middle of the park, with driving happening with all sides viewable from different vantage points. Please - no one mention to the folks here that we could go to 48 legs without a burp. (Falcon F16V3 with one (for now) expansion. All legs are driven individually.)
I have a 48x110 360 tree with 12v nodes. It was 190 amps at 40% intensity white. I powered it off of a single Meanwell RSP3000-12 in 2016 with no issues. Power supply was loaded 50% or less the majority of the time FYI
