Question on only us...
 
Notifications
Clear all

Question on only using data from controller

36 Posts
8 Users
0 Reactions
5,967 Views
Posts: 37
Topic starter
(@tbm878)
Trusted Member
Joined: 9 years ago
1pet2_9 wrote:That's why I propose to simplify it by not worrying about your data line. Unless you short data to ground, there is no safety issue there. It might not work (it probably will, but might not...), but you won't fry anything.

So only have the data line coming from the controller? Don't use a V- from controller?


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

You will probably be fine either way with V-. For purposes of keeping your controller safe, just don't rely on V- coming ONLY out of the controller.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

Use the V- from the controller, but run it (and data) over CAT-5 or CAT-6 cable, per Martin's suggestion.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

In any case, is there any reason that this needs to be settled now? Let it simmer, things will probably become clearer with the passage of time.


Reply
Posts: 339
(@heldwhat-christmas)
Reputable Member
Joined: 15 years ago
tbm878 wrote:

--12v power supplies, 200 pixels per channel, 4 channels per power supply

2----6'x6' matrixes, 2400 pixels, 12 channels & 12 power injections, 3 psu's
2----6'x5' matrixes, 2000 pixels, 10 channels & 10 power injections, 2.5 psu's
1----4'x4' matrix, 1024 pixels, 6 channels & 5 power injections, 1.5 psu's
2----12"x8' column matrixes, 512 pixels, 3 channels & 2 power injections, 1 psu

It adds up quick. I really like the Trista Lights (epic lights) house. I'm trying to emulate parts of their design. If/when i get mine done, and if i can be half as nice as his house i will be happy.

Tim

I think you are overcomplicating this.
My experience has been for 200 12V pixels you don't need to do power injection, you will be fine with just running power to the start and no power injection on any of the 56 channels. That would simplify things a lot. Personally I'm more stingy with my channels, and so for my 12V display elements, I typically run a lot more pixels off 1 channel (~800 pixels) and do power injection every 200 pixels.

In general I typically think of this as a tradeoff - do you want to avoid power injection and have a lot of channels, or minimize your channels and do power injection. You've seen to have taken the worst of both sides with lots of channels, and power injection but maybe I'm just overtired. :wink2:


Reply
Page 7 / 8
Share: