Question about "cha...
 
Notifications
Clear all

Question about "channels"

34 Posts
16 Users
0 Reactions
8,879 Views
Posts: 11
Topic starter
(@ngreen11)
Active Member
Joined: 11 years ago
[#40246]

I'm a little confused about the whole channel thing. Let me give my example of how I understand it then let me know if I'm right or wrong.

Example:
1 string of 50 pixels = 150 channels.

Each pixel has 3 channels (RGB)

3*50=150

Also, please let me know what the easiest controller to start out with would be (DMX....E31?)

Thanks!

Sent from my XT1080 using Tapatalk


33 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

yes a pixel is 3 ch, each controller has its own place, depends on what you wanna do, I used two px1s, it was easy and made a pixel tree using them my first yr I just had too inject power after 50 pixels since I used 5v pixels


Reply
Posts: 11
Topic starter
(@ngreen11)
Active Member
Joined: 11 years ago

So if a 16 channel board was $109 then the pixels aren't the expensive part, the controllers are

Sent from my XT1080 using Tapatalk


Reply
Posts: 252
(@vincerules)
Reputable Member
Joined: 14 years ago
Ngreen11 wrote:So if a 16 channel board was $109 then the pixels aren't the expensive part, the controllers are

Sent from my XT1080 using Tapatalk

If you are talking about the e682, it has 16 outputs, not 16 channels. Each output can control lots of channels.


Reply
Posts: 11
Topic starter
(@ngreen11)
Active Member
Joined: 11 years ago

Oh OK. That's the one lol. Sorry just learning. How many channels do you think each output has?

Sent from my XT1080 using Tapatalk


Reply
Page 1 / 7
Share: