I did something similar last year. 12x50 5v pixel tree (600 pixels), running from a single espixelstick. Ran pixelstick right from the power supply.

Great PIC. Thanks for sharing it.
Simply amazing what you are getting done with a $15 controller !
gadgetsmith wrote:I did something similar last year. 12x50 5v pixel tree (600 pixels), running from a single espixelstick. Ran pixelstick right from the power supply.
Brilliant information, and pics, that all makes things a whole lot easier to understand, thanks heaps 🙂 As always a picture is worth more than a thousand words !!
I agree with your observations about the power/data handling capacity of the little radio, it is an amazing little beast, and cheap. After pondering your answers to my original question, supplying the DC power to the ESP from the lighting supply shouldn't really be a problem since it is on the "other side" of a 3.3 volt three terminal regulator and it's associated filtering which should remove any "hash", hopefully there is nothing on the data common/negative lead to interfere with the data.
From the comments re the number of discrete pixels or channels that an ESP 8266 radio can handle, I gather I need to "tell" the sequencing/play-out software that the output port addressing each radio has the actual number of channels used, and is not tied to addressing the "universes" used ??
As you will deduce I am not an expert in IP / network, setup / addressing. I know just enough to get myself into trouble keeping a dozen PC's/devices on my home network under control !! 🙂
Give me a soldering iron and a piece of strip-board and I am a happy chappie 🙂
Terry
T.D.Sutton wrote:From the comments re the number of discrete pixels or channels that an ESP 8266 radio can handle, I gather I need to "tell" the sequencing/play-out software that the output port addressing each radio has the actual number of channels used, and is not tied to addressing the "universes" used ??
Terry
Here is a snapshot of the Pixel Device Setup screen on the ESPixelStick. As you can see, you specify the Starting Universe and Channel, then simply tell is how many pixels of information to look for. It will determine how many universes it needs to listen for based on the Starting universe/channel and the pixel count. The second picture is the 'Home' tab of the ESPixelStick and you can see that i've entered 700 pixels in the setup screen, so that means it should be listening for 5 universes. This is because 700 pixels x 3 = 2100 channels, and if we divide by 512 channels/universe, we get 4.1 universes, so we need to listed to 5 universes to get all the channels for 700 pixels. Keep in mind this is 512 channels/universe, not 510 as with some pixel controllers.
I should note that i've only tried up to 600 pixels with my setup, but entered 700 here to see if there was a hardware limit of 4 universes (680 pixels), but it does not appear that way, so maybe more can be driven from this controller?!


