Powering ESP PixelS...
 
Notifications
Clear all

Powering ESP PixelStick Modules

18 Posts
5 Users
0 Reactions
5,110 Views
T.D.Sutton
Posts: 445
Topic starter
(@t-d-sutton)
Honorable Member
Joined: 17 years ago
[#45634]

Question for the enlightened 🙂 Should I / Could I supply the power to ESP PixelStick modules independantly from the string/s of Pixels that they are running. Senario - several ESP pixels sticks running a 20 string mega tree with 50+ Pixels per string, I envisage applying high current 5 Volts DC to the base of the strings and am considering powering the ESP modules from a separate lower current source to keep the heavy current "noise" away from the ESP's ??

Thoughts ?? 🙂

Terry


17 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

That'll work, but make sure you connect the grounds or the data signal won't go through...


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
T.D.Sutton wrote:Question for the enlightened 🙂 Should I / Could I supply the power to ESP PixelStick modules independantly from the string/s of Pixels that they are running. Senario - several ESP pixels sticks running a 20 string mega tree with 50+ Pixels per string, I envisage applying high current 5 Volts DC to the base of the strings and am considering powering the ESP modules from a separate lower current source to keep the heavy current "noise" away from the ESP's ??

Thoughts ?? 🙂

Terry

Consider mounting your power supply and powering your pixels at the top. A much shorter distant to each string, and better control of voltage drop. Power supply under the top plate and ESP's above is how I did it. Same power supply. I run 12 universe of ESP's with most direct connected and powering pixel. In one case power is feed to the pixels from the Data Out side and ESP is power from the pixel Data In side (shortest power connection point)


Reply
T.D.Sutton
Posts: 445
Topic starter
(@t-d-sutton)
Honorable Member
Joined: 17 years ago
mrGrumpy wrote:Consider mounting your power supply and powering your pixels at the top. A much shorter distant to each string, and better control of voltage drop. Power supply under the top plate and ESP's above is how I did it. Same power supply. I run 12 universe of ESP's with most direct connected and powering pixel. In one case power is feed to the pixels from the Data Out side and ESP is power from the pixel Data In side (shortest power connection point)

Mr Grumpy - Thanks for the confirmation, I will ponder your suggestion of powering from the strings totally from the top, it may be necessary anyway as I plan to run 50+ up, with another 50+ down, ie 100+ running on the each "ESP".

Dirk - Thanks for the heads up 🙂 I figured that there would need to be a "common return" required for the data, it sort of goes with the territory 🙂

Terry


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
T.D.Sutton wrote:Mr Grumpy - Thanks for the confirmation, I will ponder your suggestion of powering from the strings totally from the top, it may be necessary anyway as I plan to run 50+ up, with another 50+ down, ie 100+ running on the each "ESP".

Terry

Terry, don't limit yourself to 100 Pixel per ESP. These are to go 4 universe, or 680 pixels. I'm doing 20x50 plus 90 on the star.....my breakdown is 2 @ 500 and 1 @ 90. 3-ESP's total.

Edit: add a sketch:
Here is my initial working drawing. Maybe something here will give you some ideas.

mt3l

Reply
Page 1 / 4
Share: