Hi Everyone,
I have bought 2 pixlite 16 long range boards and recievers (bought through here for a great deal, thanks). I have read all I can find about pixels, controllers and what not. I feel like my eyes are going to start bleeding and my head explode if I have to keep looking for answers. Anyway, I have a show with incan strings and lynx express controllers from last year. This year I plan on adding the pixlites and pixels into the show.
Questions I have are many but the first are, how do I determine how many universes, channels, inputs for programing vixen 3? It has 8 rj45 outputs and says it can do "up to 100 E 1.31" universes.
The recievers have 2 outputs in standard mode. Does the controller just automatically recognize this and split up the signal? These have an expanded mode for pixels that don't have a clock line. The total pixel count is the same just handled over 4 outputs instead of 2 -2x1020 vs. 4x510. Would there be an advantage of running expanded mode with the 4 smaller outputs instead of just running the 2 outputs? If I do run expanded mode, can I power regular 3 wire pixels and just connect the data wire to the board and power them independently?
I currently have 2 strings of 5 ws2811 or 2812 pixels that I have been playing with. I used a router I had laying around and got it all hooked up. Did a simple arch chase in vixen 3 and made the string dance. It worked. I'm not completely sure what I'm doing when it comes to patching and universes with pixels in vixen but did make it work with 1 string. I'm afraid when I get to multiple arches, mega tree and grid, I'm going to run into information overload.
Thanks for any input,
Darrin
