Hi all, I'm in the UK, I have purchased pixel lights from Ray and want to put these around the window frame. I do have some mounted in pcv piping however I want an easy way to fix the pixel lights around the frame that makes it easy to do and remove. Also I need to extend the pixels cable to the main controller, so I'm not sure what style of cable to use. Been told it needs to be 18-20awg so would a 3 wire pond cable work, needs to be uk based cable and something easily accessible. Thanks in advance.
Hi, I'm UK too. With regard to the fixing I'm not quite sure what your asking (pixles to the frame, frame to the window or both) tieraps may well be the answer to both. The cable is abit easier and you have lot of choices. There are three factors to consider: The distance to the controller, the number and voltage of the pixels.
If you have vinyl trim around your windows, you could affix small pieces of J-trim to the PVC and then hang the frame on the vinyl trim around windows.
I do this every year and they just snap on off easy.
I used the panel board pvc trim it has a long side and a tray stapled it up with the long side on the back and slid the led strips into it. it holds it super snug and straight
