Notifications
Clear all
Dec 03, 2014 8:18 pm
Also, you might consider buying yourself a voltage meter and continuity tester. You really cannot rely on documentation as it gets dated quickly. You should really test it which pin on your connector comes out on which color wire and make a diagram.
The last thing you want is to inject power into expensive pixel strips where it won't like it.
Dec 03, 2014 8:20 pm
I agree...if you're in this hobby you NEED a good multimeter that can test for continuity, etc
Dec 03, 2014 8:50 pm
Thanks guys, I have them hooked up. They are "on" but they are not really doing anything I tell them to do! Will see how this goes!
Page 2 / 2
Prev
