Pixel setup Newbie
 
Notifications
Clear all

Pixel setup Newbie

4 Posts
2 Users
0 Reactions
1,607 Views
Posts: 7
Topic starter
(@andy16)
Active Member
Joined: 9 years ago
[#47790]

I’m making the final connections on my pixel tree. I have 16 strings of ws2811 LEDs, 100 leds per string. My tree is 32 strings of 50 LEDs. I was planning on keeping the pixels on 1 string but this means LEDs 1-50 would run bottom to top and 51-100 would run top to bottom.

I’m using Vixen 3 and a E682. How do I make these settings or do I I have to cut the string and get them all running bottom to top?

Thank you in advance.


3 Replies
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago
Andy16 wrote:I’m making the final connections on my pixel tree. I have 16 strings of ws2811 LEDs, 100 leds per string. My tree is 32 strings of 50 LEDs. I was planning on keeping the pixels on 1 string but this means LEDs 1-50 would run bottom to top and 51-100 would run top to bottom.

I’m using Vixen 3 and a E682. How do I make these settings or do I I have to cut the string and get them all running bottom to top?

Thank you in advance.

You can do zig zag in the E682. Just tell it First Zig is 50 Then Every 50 on the output page.


Reply
Posts: 7
Topic starter
(@andy16)
Active Member
Joined: 9 years ago

Ok that makes perfect sense, but I have a 90 pixel star on my tree. So I've got it setup like the following. It would work for the first 3 banks of lights but I don't know how I would make that work with the star in the 4th bank?
Tree 1 100 Pixels
Tree 2 100 Pixels
Tree 3 100 Pixels
Tree 4 100 Pixels
Tree 5 100 Pixels
Tree 6 100 Pixels
Tree 7 100 Pixels
Tree 8 100 Pixels
Tree 9 100 Pixels
Tree 10 100 Pixels
Tree 11 100 Pixels
Tree 12 100 Pixels
Tree 13 100 Pixels
Star 1 90 Pixels
Tree 14 100 Pixels
Dummy 90 Pixels, defined but not used
Tree 15 100 Pixels
Dummy 90 Pixels, defined but not used
Tree 16 100 Pixels


Reply
Posts: 740
(@ezellner)
Prominent Member
Joined: 11 years ago
Andy16 wrote:Ok that makes perfect sense, but I have a 90 pixel star on my tree. So I've got it setup like the following. It would work for the first 3 banks of lights but I don't know how I would make that work with the star in the 4th bank?
Tree 1 100 Pixels
Tree 2 100 Pixels
Tree 3 100 Pixels
Tree 4 100 Pixels
Tree 5 100 Pixels
Tree 6 100 Pixels
Tree 7 100 Pixels
Tree 8 100 Pixels
Tree 9 100 Pixels
Tree 10 100 Pixels
Tree 11 100 Pixels
Tree 12 100 Pixels
Tree 13 100 Pixels
Star 1 90 Pixels
Tree 14 100 Pixels
Dummy 90 Pixels, defined but not used
Tree 15 100 Pixels
Dummy 90 Pixels, defined but not used
Tree 16 100 Pixels

You will have to do that in the patching step in Vixen. Patch the first 50 pixels of tree 13 normally, then patch the second using the reverse check box, then patch the star normally. (I'm assuming you are indicating that this is all on Output 13) Be careful when using the reverse check box because it doesn't reset after you have patched something. You need to uncheck it if the next group is patched in regular order.


Reply
Share: