To me, rope light has a similar appearance no matter which direction it is turned. Square or rectangular will have a different appearance since the PCB in them will block light from going out the back. The square and rectangular will also not wrap the same as rope light on some elements. That is why I pointed out that even though it says rope light, the pictures indicate it is just a long spool of strip.
CaptainMurdoch wrote:To me, rope light has a similar appearance no matter which direction it is turned. Square or rectangular will have a different appearance since the PCB in them will block light from going out the back. The square and rectangular will also not wrap the same as rope light on some elements. That is why I pointed out that even though it says rope light, the pictures indicate it is just a long spool of strip.
If you look closely at the pixels they are off set use the magnifier .
I would think they used 2 strips back to back
Also you are correct that the square and rectangular do not wrap the same as round to some elements .
Rectangular wraps better than round , especially to round wire framing and can be tied securely very easily .
I have created my own rope lights with 2 strips back to back and 360 light is a non issue .
Though I use translucent silicone rather than clear .
The short of this clear product is, the outer casing shape will not change the light appearance or how the product can be manipulated .
Remember that Ray is not a magician and cannot bend strip in ways it just will not , regardless of roundness
There is only one manufacturer that I know of with rgb leds and flexible for 360 in a round package .
It is quite costly and requires custom connectors .
Cheers
