Suggestions needed ...
 
Notifications
Clear all

Suggestions needed on Pixel Controllers

19 Posts
9 Users
0 Reactions
5,180 Views
Posts: 326
Topic starter
(@robertb)
Reputable Member
Joined: 17 years ago
[#40659]

For newbies in Georgia... don't ever buy strips. I know someone else on this forum that has said the same thing. I have replaced my dumb strips on my house in some shape or form now for 3 years. Started out with the IP65 and went to the silicon filled IP68 rated. Still had failures. Have dumb pixels that I have used that are still going strong. So I have decided to bite the bullet and get smart pixels on my gutters and roof strips. You can see what I have done in this video (

and probably better in this one (

) .

The issue I am worrying about is the run to the strips themselves. I have my controllers for the gutters and roof strips on the porch. I would like to keep it that way. I realize I might have to interject power to them. Would love suggestions on this as well. Some of the runs to the controllers (for the strip 1 on the top roof, to the far left) is probably 30 or 40ft.

I am going to be using flat pixels on the vertical roof strips and bullet nodes on the gutters. I have right now 2 e682's on my pixel tree, 1 e682 on my flextech arches and 1 LOR Pixcon16 on my snowflakes. I would love it if I didn't have to inject power. Not sure if these or maybe the Falcon or any others would let me not have to do that. Again, if there is no way... I'm ok with that. I want to do this right.

So I am wanting some suggestions on controllers. Open to suggestions on pixels as well. Looks like I will need about 13, 16ft strings.

Thanks,
Robert


18 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Your best bet for a Pixel controller is the Falcon F16v2. There is a group buy going on right now. It can drive strings at longer distances than most any other, definitely further than the e682. For Pixels, there are several vendors holding Pre-Sales right now, and there is always Ray Wu.


Reply
Posts: 95
(@broomy111)
Estimable Member
Joined: 11 years ago

Group buy on the Falcon card? I was ready to buy it last night because of the longer distances on the pixels and not having to dedicate a bank of four outputs on my e682 for the rs485. Seems like it will be a nice addition with my other Sandevices.

Sent from my iPad using Tapatalk


Reply
Posts: 326
Topic starter
(@robertb)
Reputable Member
Joined: 17 years ago

Are there actual numbers between the e682 and the Falcon? I mean as far a distances are concerned. I looked over at Falcon Christmas and couldn't find a link for the group buy. Can you send a link over please?

Also on a side note...
I'm not getting notices to my personal email inbox when I get a response here. (not the inbox here on this forum) I've checked my settings and it seems to be correct. Anything else to do?


Reply
Posts: 270
(@petulka77)
Reputable Member
Joined: 14 years ago

Wow up 2 10240 pixels by 1 controller! Can you provide the group buy link?


Reply
Page 1 / 4
Share: