Notifications
Clear all

Pixel Question

8 Posts
7 Users
0 Reactions
3,463 Views
Posts: 168
(@slovanredneck)
Estimable Member
Joined: 17 years ago

As long as it's not GECE pixels. I think you can only have 62 of them in a string. Everything else you should be ok.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
slovanredneck wrote:As long as it's not GECE pixels. I think you can only have 62 of them in a string. Everything else you should be ok.

It does depend on your pixel type and controller capabilities. The WS2811 has no practical limit on the number of pixels in a string. All of the limits come from the controllers and the need to deliver changes in data to the pixels in a timely manner. For example, using the ws2811 pixel, the PX1 tops out at about 200 pixels in a single string. The F16V2 tops out at 640 pixels per string. I designed an ASiC implementation that topped out at 2700 pixels per string. At those lengths you start getting visually evident delays between updating the first and last pixel in the string (put the first and last pixel of a 2700 pixel string next to each other and you can see a delay between the color changes on the two pixels).

In all cases you need to inject power regularly. In my display I try to inject power every 25 - 30 pixels (driven more by my power distribution system than the pixels). I have a few places where I inject every 50 pixels and the color is fine (but it tends to make my buck converters run hot). As with any advice on the forum, you may need to adjust things for your situation.

Other pixel types will have other characteristics and limitations. So the answer is, we cannot answer your question without a bit more information. What type of pixel are you working with?


Reply
JP90
Posts: 376
 JP90
(@jp90)
Reputable Member
Joined: 19 years ago
funstick wrote:Is it possible to cut a 50 pixel strand in half (two 25's) and solder the cut strand to another 50 pixel strand to make a 75 pixel strand?

I thought I would ask before I did something stupid.

Thanks!

Mike

Mike as other have said you can make any size you need but be careful, I mixed 5 volt pixels from two different orders to make 5 - 60 pixel strings, found that the last 10 pixels that were cut from the 50 pixel string from the different order the "white" did not match, it looked like I did not use power injection but I did and there was 4.9V at the end of the string which should have been OK.

Gary


Reply
Page 2 / 2
Share: