Pixel data voltage
 
Notifications
Clear all

Pixel data voltage

53 Posts
9 Users
0 Reactions
13.7 K Views
Akentut
Posts: 235
(@akentut)
Reputable Member
Joined: 14 years ago

Was checking out this tread and since I have 5v pixels, was running into the same problem with WHITE, yeah they are pink and even red at the end of a 150 run. But like the others said running a 12 or 24VDC would work well with stepdown controllers. I found a DROK waterproof one on Amazon...

Alan


Reply
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago

I've finally figured out what my issues are. They are the pixels themselves. I had 10 sets of 50 and 7 of the sites are going bad. 3 of the sets have only 49 pixels. I've had nothing but issues ever since I got these particular 5 volt pixels. I threw all 10 sets in the garbage and chalk it up to a learning experience.

Sent from my Nexus 7 using Tapatalk


Reply
Posts: 1344
(@mrsmoofy)
Noble Member
Joined: 12 years ago
pmiller wrote:I've finally figured out what my issues are. They are the pixels themselves. I had 10 sets of 50 and 7 of the sites are going bad. 3 of the sets have only 49 pixels. I've had nothing but issues ever since I got these particular 5 volt pixels. I threw all 10 sets in the garbage and chalk it up to a learning experience.

Sent from my Nexus 7 using Tapatalk

Where did you get these


Reply
Page 11 / 11
Share: