Pixel Data Router (...
 
Notifications
Clear all

Pixel Data Router (aka Pixel Delay or Pixel Splitter)

19 Posts
9 Users
3 Reactions
1,837 Views
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago
[#59129]

Coming soon:

Pixel Data Router is a flexible WS2811 pixel distribution controller designed for custom LED installations, props, displays, and architectural lighting projects. Available in 4-channel and 8-channel versions, the router distributes pixel data while allowing each output to be individually configured for the exact number of pixels required.

The controller can be programmed to use fewer active channels when needed, making it ideal for installations of varying sizes without wasting outputs or controller resources. Each channel supports configurable WS2811 pixel counts, giving installers precise control over pixel allocation and simplifying complex layouts.

Pixel Data Router helps reduce wiring complexity and streamlines large pixel installations by efficiently managing data routing across multiple outputs.


18 Replies
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago

Hello everyone!
After a long break from electronics, I have decided to restart some of my projects and chose Pixel Data Router (previously calledPixel Delay/Pixel Data Splitter) as the first to do.
Above video shows 8 channel prototype board, the finished board will come with line drivers.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Hey , You are still going . Great to see you back in this Forum Rob.


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

I'm interested in how this would be used.


Reply
Posts: 849
(@tfischer)
Prominent Member
Joined: 17 years ago

Also interested in more detail. Can you describe what comes in the input, and what is done with it at each output?


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Even reading the description, I still don't know what this really does and why it's needed.


Reply
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

It is a variation of pixel splitter. Original use of pixel splitter was that odd roofline that took off in the middle of the edge pixels. WS2811 in and a variable number of ws2811 pixels out each branch. Still limited to the number of pixels per port of the controller and your fps but no need for using another port for those odd things.

This current version would be good for low pixel count high density props where daisy chaining only gets you so far. Think maybe a cluster of eight 50 count stars that must hang from above.


Reply
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago

Imagine you have a tree and 8 long strings of 100 pixels on each branch. To control them, you would need to use 8 channels or run data from each string's end back to beginning of the next one. With the router, you only need one channel and no need for return data. You send data for all of those strings on a single channel, 800 pixels. First 100 pixels will be directed to ch1, to first string, then next 100 to ch2, and so on. If you use 7 strings only, you can use ch8 to send data to the next router with another 7 or 8 strings.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Okay, I understand now. A picture makes all the difference.

Pixel Delay   Pixel Data Splitter

Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

One question. In the video the pixels are only lighting up "so far" on each of the strips (and it appears to be varied), then going on to the next. How is this set?

FYI - I think this would solve a couple of things I'm working on this year.


Reply
Page 1 / 2
Share: