Pixel Board aspect ...
 
Notifications
Clear all

Pixel Board aspect ratio

5 Posts
3 Users
0 Reactions
1,901 Views
Posts: 44
Topic starter
(@scottn3xcc)
Trusted Member
Joined: 13 years ago
[#42679]

Ok... So I am building a pixel board using two panels 4'x8'. These utilize the PixelNet product from Holiday Coro. (highly recommend) As such, each panel will be 24px high by 48px long. My question is: Do I put the panels end-to end and make a 24px high by 96px long display, or do I stack them on top of each other and make a 48px by 48px display?

I realize the answer is going to be "it's personal preference." I'm just wondering which orientation would be the most versatile in more situations. I had thought of doing some "video" but I'm not sure if 48x48 is high enough resolution for sudo video.

If it were you, what would you do?


4 Replies
StickyWicket
Posts: 548
(@stickywicket)
Honorable Member
Joined: 14 years ago

If it were me I would do 24x96 as it would allow you to do more letters visible at a time (If you were doing text)

Either way I would wire it up so that each panel could be independent. That way you can rearrange them or even split them up if you change your mind later.


Reply
Posts: 86
(@markrvp)
Estimable Member
Joined: 19 years ago

I made a square with my two sheets. It exactly fits in a large window on the house.

8x8 Panel
IMG 8620

Reply
Posts: 44
Topic starter
(@scottn3xcc)
Trusted Member
Joined: 13 years ago
markrvp wrote:I made a square with my two sheets. It exactly fits in a large window on the house.

After seeing your photos, I think I am going to follow suit and make mine a 8' x 8' square also. :yeah:


Reply
Posts: 44
Topic starter
(@scottn3xcc)
Trusted Member
Joined: 13 years ago
StickyWicket wrote:If it were me I would do 24x96 as it would allow you to do more letters visible at a time (If you were doing text)

I neglected to mention that I still plan on keeping my old GECE board that was 16x50 pixels and cutting it down so that it would be 8x100 pixels. My idea was similar to yours in that I could use that pixel board as they do the fascia boards in stadiums.:)


Reply
Share: