Pixabulbs, mounting
 
Notifications
Clear all

Pixabulbs, mounting

24 Posts
13 Users
0 Reactions
10.1 K Views
Posts: 11
(@ndhouston)
Active Member
Joined: 14 years ago

I just got my first string of pixabulbs up today with the under-shingle clips from Home Depot (first picture in the thread). I'm not sure that these will all survive the mounting process or be useable next year, but they were cheap (~$4.00 for a box of 75). Of the 50 I mounted, no clip failures and the were all snug enough. I think I bent some of them more than they were really interested in bending, but no outright breakage. I have no concerns about the light string coming down.

Lesson learned: attach the clips to the lights on the ground, not in the wet and cold on a ladder in fading light.


Reply
Posts: 214
(@gary-martin)
Estimable Member
Joined: 18 years ago

I used Walmart white nylon clips to attach my house eve's Pixabulbs and then Hobby Lobby green wire ground stakes (perfect fit on the ground stakes). I found a number of different clips that fit around the base nicely.

Dmcole: As to attaching to PVC, why not just ziptie the wire on both sides of the base? That should hole them very securely to PVC.


Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago
Gary Martin wrote:Dmcole: As to attaching to PVC, why not just ziptie the wire on both sides of the base? That should hole them very securely to PVC.

Gary: Yeah, that's the current plan. Was trying to get some feedback on three-eights vs. one-half-inch and whether Sched 40 is heavy enough (or too heavy).

Thanks.

\dmc


Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago

I used 1/2" White PVC Class 200, thinner than Schedule 40 and it works fine. I buy it from the sprinkler supply house in 20' lengths. I figure I should get several years before the PVC has UV problems. If you don't like the look of standard elbows you can get inside ones but I they only work with Schedule 40 pipe.


Reply
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago
Keith R wrote:Here are some that I had that fit great! I don't know the brand, but I need to find more myself.

I have some of these too. Pixabulb fits reasonably well in the three prongs as shown in your pics - but alas when clipped to my gutters this orients the bulb horizontally facing away from the street (base toward the street)!

If I clip the middle prong, the Pixabulb can fit in the opposite direction, less snugly, in the two main prongs, horizontally with the top facing the street. Any opinion on the visual or waterproofness implications of that, versus finding some other mount with the bulb oriented upward?


Reply
Page 4 / 5
Share: