Pixabulbs, mounting
 
Notifications
Clear all

Pixabulbs, mounting

24 Posts
13 Users
0 Reactions
10.1 K Views
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago
Keith R wrote:Here are some that I had that fit great! I don't know the brand, but I need to find more myself.

I've got a bunch as well which I got mainly from HomeDepot on sale. I did not think that they would stretch that far without breaking but I guess they do.

I keep wondering which is the best mounting, vertical like you show or horizontal pointing out. Have you tried both ways and what did you think?

Next year I was thinking about adding pixel strips a ways below the bulbs then follow that up with icicles pixels after that. It's a multi-year plan.

Now to figure out what to do around the windows, use the bulbs or go with pixel strips. I already have the frames I used last year with some standard white LEDs spaced about 3" apart. From a distance you could only see the point of light and not the bulb, since they are small, and they looked good so I'm tending to think pixel strips tied the frames. Still the bulbs would look great as well although they would be spaced much further apart.

Decisions, decisions, decisions.


Reply
Posts: 838
(@strother85)
Prominent Member
Joined: 15 years ago
Keith R wrote:Here are some that I had that fit great! I don't know the brand, but I need to find more myself.

I have used these in the past for C9's on the roofline, and will be using them this year for pixabulbs. They have them at menards and home depot, $4 or so for 100 count.


Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago
tjetzer wrote:I took some time to dig through my assortment of clips to find what worked best for the PixaBulbs. I have a few options that I feel are very viable options. I have attached a picture with 3 clips that work well.

I do have other clips that worked as well as those I have pictured, I just didn't take a picture of those. If people are looking for more options I can post a picture of the others I have.

I also have no use for all the clips I have. A box of 90(ish) weighs in at just under a pound. Anyone that wants some please PM me and we'll work out shipping.

I must say that I was surprised with the one on the far right. I did not expect the hole for a C9 to be large enough. Obviously when you snap off the cover it fits through the hole. I'm assuming that the mount needs to be fairly thin for this to work.

Just incase there are differences between manufactures of that type of mount can you post the diameter of the hole and the thickness of the material?

It's hard to tell from the angle in the photo but was there much downward flexing in the mount?


Reply
Posts: 339
(@dan-ross)
Reputable Member
Joined: 19 years ago

I picked up a few boxes of these on the after Christmas sales at Lowes which are pretty much the same thing. The pixabulb pushes in without having to take the cover off the pixabulb.

Pixabulb Clip

Reply
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago

Has anyone tried zip-tying Pixabulbs to PVC pipe? Unfortunately the concave aspect of the bottom of the bulb is 90-degrees off for getting them to settle into the curve of a piece of pipe, but I'm thinking three-eights or half-inch Schedule 40.

Nosed around at the hardware stores and they seem to sell this stuff only in four-foot or 10-foot (or, as was patiently explained to me this afternoon, 9-foot, 11-inch, as they cut 20-footers into two and sometimes miss the middle by a smidge and they got caught by the weights and measures department).

Can't get 10-footers into the Beetle and probably can't get them into the SUV ... guess I'm going to eat the price and buy four-footers and some fittings and cement.

Thoughts?

\dmc


Reply
Page 3 / 5
Share: