Hello All,
I am rather new to the Pixel control scene but am very interested in trying to gain better insight into this. I am working with a local non-profit group who puts on a large Christmas display in our community every year and I have been brought in to try to modernize things a bit to current technology. For our community this is a very large display, a few hundred wire frame displays, some in excess of 3000 lights to them, I believe the last count was in excess of 25,000 lights in total. These displays have grown over the last 23 years, all starting from a local resident who was our "Mr Christmas", after his death this became a local group keeping his spirit alive and we are now approaching our 25th anniversary so I am aggressively trying to bring things up to speed and show after 25yrs we can still put on a great display and keep our children's attention in the age of I-phones and so forth. Problem is many of these displays are ageing and out of touch with current technology. A second problem is many of these displays have various colours throughout them, which has led me to RGB pixel control.
I think from what I have managed to take in so far is that automation controls using pixels is a very valid solution and I have a few currently that we are modernizing incorporating them with LOR systems we have just started into as well, with the LOR S3 and Sandevice E682's we seem to be making headway with this modernization.
The BIG question I am currently looking at is the vast number of other wire frame displays we have, trying to modernize them without going full blown automated. I am looking to learn what my options are to incorporate the RGB-Pixels into a static display, what controls are required and so forth along with "how to" or advise. Some displays I am looking at may have anywhere from 50 - 500 pixels on them once converted to RGB, I am still lost on how do I manage them WITHOUT a PC running them? Can I make a 50 Pixel display for example with 2 Black, then 15 Brown, then 2 Blue, 5 more brown, 3 red, 5 brown, 5 white, then the rest all brown. (Like a Rudolph reindeer head)
1- Is there a simple control card or device that I can set this up with and keep it right on the display remembering how I want it to run for colours?
2- Beyond this, when I get to a display that has 250 Pixels required, can I do the same? (I am assuming this is a matter of how many "universes" can be supported)
3- Even further beyond this, is there a standalone programmable device that I can use that flips these colours on a schedule between various different colour schemes without being on an automation system, just standalone?
4- Over the top, is there a device that can do this all for me, but if one year I decide to throw it in an automation display that I can tie it into one of the automation control networks and go nutts, but then the next year throw it back as a static display easily?
Any direction, devices, advise would be greatly appreciated!
:yeah:
Looks like I have found a potential solution, the T-1000S seems to cover off my first 3 questions but doesn't look like it will do the 4th. Guess I can always wire them to the T-1000S for static and re-wire to E682's when wanting them in an automation displays.
If there is a better solution feel free to weigh in, I am all ears to try to find the best solution.
Hi Electrified3,
While I am by no means an expert I could point you to a few "show players" that might fulfill some of your requirements but won't automate your show for you. If you are looking for pre-built material, you could always check the Shared Sequences section of the forums and base your show off that. You would still need to do some sequencing and setup based on your specific layout - with the sequencing software you choose to employ (HLS, Vixen, LOR, etc.).
The first player would be the FalconPi Player: http://doityourselfchristmas.com/forums/showthread.php?27136-The-most-amazing-thing-I-have-seen-the-Pi-Player-from-Dave-Pitts&highlight=falcon
The next player would be the Helix Show Controller: http://doityourselfchristmas.com/forums/showthread.php?26235-Helix-Ether-Node-Controller
I've never worked with either of these products before so you'll have to read up on them and ultimately decide for yourself if either suits your needs.
Good to see another Canuck on here!
Hope this helps,
Shane
Shane,
The FalconPi looks very interesting. Will have to do some reading up on that one for sure.
Looks like you are not too far away fellow Canuck, I am only about 3hrs away from you.
Thanks for the info,
Bill
Depends on how technical you are. Everything you've mentioned can likely be done with an arduino, or some form of arduino-based device like the Komby RF1.
You can likely run a lot of pixels from one. You could custom-make something that writes your pixel data out without using the wireless portion, just hard code some data into what you flash to the RF1s. I'm likely going to be building some RF1s for some more "static" landscape lighting and such for my house after this year's Christmas season is over.
