Odd pixel behavior
 
Notifications
Clear all

Odd pixel behavior

9 Posts
6 Users
0 Reactions
1,292 Views
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Random across the display seems odd , but may have a common issue .
My guess would be in this order if not bad pixels.

*A flaky SD card perhaps (some static charge issue or other ) ?
*Poor contacts at connection points (especially gnd) .
*Power supply questionable ?

gremlins are a real possibility from any of the above .


Reply
Posts: 418
(@richienorthcott)
Reputable Member
Joined: 7 years ago
1pet2_9 wrote: (or even better, if I am getting 12v through that 5v pixel).

what do you mean by this statement?


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
RichieNorthcott wrote:what do you mean by this statement?

A head scratcher here also .
Unless they are using .. 12v to 5v step down converters and sum ting goes wrong .


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago
RichieNorthcott wrote:what do you mean by this statement?

I use those half-broken pixels as a debugging tool. They immediately tell me whether I've got power, because they'll glow red or blue always (which is the reason we call them broken). But if they glow white and they're 5V pixels, either they're taking in 12V or it's an uncommon short condition. Oops. But at least I find out now, before the real pixels connect on the circuit. What do I risk...blowing out the broken pixel? They might also extend range by a little bit as a null pixel, if glowing red is the only thing wrong with them. But usually i sneak it behind a wall prop, because it's hard to get up on a ladder just to debug things. if my prop high up is having problems, is it data or power? Look at the null pixel from underneath. It's power.


Reply
Page 2 / 2
Share: