No Pixels Lighting ...
 
Notifications
Clear all

No Pixels Lighting on E682

17 Posts
6 Users
0 Reactions
2,563 Views
Posts: 503
(@iflights)
Honorable Member
Joined: 14 years ago

Might as well show us the 2nd page as well where you define the number of pixels per socket. Why are you not connecting the V+ to the phoenix connector? Lets try to simplify the environment first by using the board as it was designed.


Reply
Posts: 8
Topic starter
(@jonnes86)
Active Member
Joined: 4 years ago
iflights wrote:Might as well show us the 2nd page as well where you define the number of pixels per socket. Why are you not connecting the V+ to the phoenix connector? Lets try to simplify the environment first by using the board as it was designed.

That's fair. I was in the middle of trying another solution. But here are the other pictures.

Capture2

IMG 1212

Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

You need to apply power to that side of the pcb for group 1 and 2 to work .

J18 i believe .


Reply
Posts: 8
Topic starter
(@jonnes86)
Active Member
Joined: 4 years ago
angus40 wrote:You need to apply power to that side of the pcb for group 1 and 2 to work .

J18 i believe .

Still not working when configured like so.


Reply
Posts: 8
Topic starter
(@jonnes86)
Active Member
Joined: 4 years ago
angus40 wrote:You need to apply power to that side of the pcb for group 1 and 2 to work .

J18 i believe .

The picture on my last post is my current configuration. I believe that is what you're referencing.


Reply
Page 2 / 4
Share: