Apparently none of the GECE products sold at Lowes this year have remotes any more. That doesn't bother me, the different voltages that vary from product to product has my perked my curiosity.
dougd wrote:Where did you find a 7 volt power supply.
I'm trying to recall actually, took a bit of searching. Looking for anything related to their purchase and not finding anything. Will head out into the garage and see if I can get anything from the boxes.. uugh, somethings should be documented 🙂
Tory
Livermore-Dad wrote:I'm trying to recall actually, took a bit of searching. Looking for anything related to their purchase and not finding anything. Will head out into the garage and see if I can get anything from the boxes.. uugh, somethings should be documented 🙂
Tory
Okay, I have a couple of these as well as a couple of their 12V 20amp options. They fit in the CG-1500 with the Ren48LSD or E681
http://www.powersupplydepot.com/7-5-Volt-Power-Supply-20A,-150W,-Switching,-Hengfu/16018+PS/
Maybe get away with 13A version for $2 cheaper
http://www.powersupplydepot.com/7-5-Volt-Power-Supply,-13-5A,-100W,-Switching,-Hengfu/16012+PS/
The MeanWell units are good quality. I've used them for two years without a problem. 7.5v, 40a for $65 here:
http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_394215_-1
ags0000 wrote:The MeanWell units are good quality. I've used them for two years without a problem. 7.5v, 40a for $65 here:http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_394215_-1
Nice 400Watts, but is one ever going to push that with a single e681/e682? Can buy almost 3 of the ones listed below for that price. Also with that kind of wattage you do need a fan and circulation, I don't push the small ones enough to cause any issues without it being internally cooled.
All my current pixels showed a whopping 1Amp when set all to on. I think even my 20Amp is overkill 🙂
Tory
ags0000 wrote:The MeanWell units are good quality. I've used them for two years without a problem. 7.5v, 40a for $65 here:http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_394215_-1
Are you running your GECE pixels at 7.5 volts also? Anyone else running there pixels above 5 volts?
Livermore-Dad , are the pixels overall brighter using this voltage?
dougd wrote:Are you running your GECE pixels at 7.5 volts also? Anyone else running there pixels above 5 volts?Livermore-Dad , are the pixels overall brighter using this voltage?
I don't believe they are brighter, but they are not starved. White is white not pink.
Tory
Livermore-Dad wrote:I run all my GECE's with a 7volt power supply.. And these are 2-3 years oldTory
I too run my GECEs with a 7.5 volt supply with the adjustment all the way down.
Livermore-Dad wrote:Nice 400Watts, but is one ever going to push that with a single e681/e682? Can buy almost 3 of the ones listed below for that price. Also with that kind of wattage you do need a fan and circulation, I don't push the small ones enough to cause any issues without it being internally cooled.All my current pixels showed a whopping 1Amp when set all to on. I think even my 20Amp is overkill 🙂
Tory
I didn't say anything about e68x or any controller for that matter. I'm running 64 50-pixel strands, so they work for me in my application. I'm offering my experience, and expect a prospective buyer to understand his/her own needs and chose accordingly.
dougd wrote:Are you running your GECE pixels at 7.5 volts also? Anyone else running there pixels above 5 volts?Livermore-Dad , are the pixels overall brighter using this voltage?
I'm running at 7 volts, with a longer initial (power) lead to the first pixel (higher IR drop than OEM).

