Okay this is my second year doing synced light show. I was thinking of replacing my 30 chan mega tree with pixels. first would i still be able to use my renss with a pixle setup. what i mean will i be able to chain the boards like i do with renss. second what will i need to make this happen. pixels are intresting and would like more info on them. i fugered changing up the mega tree would be a good place to start. so any advice/help would be great thanks.
As of right now.. I believe the answer is "No, you can't chain a pixel controller in series with your REN's". There is work being done (by brains much sneakier than mine) on just such a controller, but it is not available as a viable alternative just yet.
So you would need to go with a second control path. One for existing REN, and one for the new PIXEL controller.
[Edit: That is to the best of my knowledge.. I'm sure others will set me straight if I have misspoken here]
Phil is in the process of creating a Renard based Pixel controller that should daisy chain with your existing Renard controllers. However, channel count may become an issue and you might want to consider one Renard port for non-pixel lights and anther to handle your pixels. For example: each pixel uses three channels for its data. at 4 inch spacing and a ten foot leg, such a pixel tree would use 30 pixels or 90 channels per vertical leg. 10 vertical legs uses 900 channels. That is pushing a renard chain pretty hard. The Renard Pixel controller supports higher baud rates to allow for the extra channels.
The Renard SS controllers are only designed for controlling regular AC lights, not pixels. You need a different controller for pixels. There is a pixel controller, the PX1 that can be plugged into a renard network to control pixels. There is info in the Wiki about it. The real issue with pixels and mega trees is the high channel count and number of pixels you need ($$) to make a megatree. Many folks use a larger pixel controller like the E682 to control a large collection of pixels in a megatree. There is some general info in the wiki on Pixels.
LabRat wrote:As of right now.. I believe the answer is "No, you can't chain a pixel controller in series with your REN's". There is work being done (by brains much sneakier than mine) on just such a controller, but it is not available as a viable alternative just yet.So you would need to go with a second control path. One for existing REN, and one for the new PIXEL controller.
[Edit: That is to the best of my knowledge.. I'm sure others will set me straight if I have misspoken here]
Ah ha! Yes, the Renard PX1 pixel controller will do that, as a matter fact the video I posted had a SS8 in series with it (same COM port). 🙂
Yes, in beta test right now, but I see no reason for it to be available soon.
