need some info/help
 
Notifications
Clear all

need some info/help

18 Posts
10 Users
0 Reactions
6,566 Views
Donny M. Carter
Posts: 1008
(@donny-m-carter)
Noble Member
Joined: 16 years ago
jklingert wrote:Budude's adapters are cheap and simple, and they are a lot cheaper then a E682....
There is a wiki page about them.
I think Brian still has spare pcbs.

I used this adaptor last year running around 100 DMX channels with no problems!


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

I have lots of extra PCBs but am pretty much out of extra parts however. I would recommend these even for the E682 or E6804 as well because it adds an additional layer of protection to your E68x and it provides an RJ45 already wired for standard DMX or Renard wiring.

Let me know if you want them - I think the part list is in the Wiki - if not I'll add that. The parts are all common bits you can get anywhere really.

edit - just checked - there is a BOM (Mouser) in the Wiki for all the parts - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8335f174c6


Reply
LightUpMA
Posts: 208
(@lightupma)
Estimable Member
Joined: 15 years ago
budude wrote:I have lots of extra PCBs but am pretty much out of extra parts however. I would recommend these even for the E682 or E6804 as well because it adds an additional layer of protection to your E68x and it provides an RJ45 already wired for standard DMX or Renard wiring.

Let me know if you want them - I think the part list is in the Wiki - if not I'll add that. The parts are all common bits you can get anywhere really.

edit - just checked - there is a BOM (Mouser) in the Wiki for all the parts - https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8335f174c6

I would like one. I tried to pm you but I cannot for some reason. How much do i send you?


Reply
Page 4 / 4
Share: