There are sooo many different strips I'm confused. I'm wanting as dense a strip as possible for a Nutcracker Tree.
I'm looking at Ray Wu's store but want some advice please. I will be driving these with E682s.
Check out holidaycoro.com they are having an epic presale on pixels. The 300 led a ws2811 strip is as dense as you can find without going to to ws2812b or ink1003 pixels (on led IC)
I think the spec's you want to look at are "LEDs per meter", voltage (5vdc or 12vdc), and a chip that the E682 supports (ws2811, ws6809) and is RGB. Most strips are 30 leds per meter or 60 leds per meter so if you want dense you want 60 leds per meter. However if you're interested in nutcracker effects you want to try to make the strips in the center of the tree the same distance apart horizontal as vertical. So it would look better using 30 leds per meter plus it's easier to program and power.
Sent from my SCH-I545 using Tapatalk
U need to decide 5v or 12v first. What controllers you are going to use and then decide if you want individual bulbs or flex strips. If you u get flex strips u need to decide if you want individual control like a tm1809 or lights in groups of three like the ws2811 12 v.
Individual nodes allow for taller trees. Tm1804 , 128 nodes is 33' long. 128 flex nodes is 14' long. Flex strips allow for perfect vertical spacing, easier mounting .
1node flex strips give higher vertical density. This is great if you want to display a picture or a movie.
Lor ccr's are the same as ws2811 12v flex strips. 150 LEDs but u address them in groups of three.
My megatree is tm1809, 4m high.
My arches are the 12v 2811's.
Ws2811's are the cheapest per meter currently. $6/m from ray and cheaper from holidaycoro currently.
Aaron troxel built a megatree for his city park. It was (64)x150 led, 5m ws2811 12 v flex strips. He had 7000 visitors and they loved that megatree even though it was in groups of 3.
All nutcracker effects will work, including text, pictures, but they will be stretched vertically. All other effects work just fine.
Hth
This is great info to me, thanks! I've been interested in learning about the differences in look between the densities of pixel strips.
Is it fairly common for the 12 strip mega tree to use the 30 per meter/ws2811/12v strip? Or are people using different strips for the 12 strip mega trees?
Thanks!
Most 30 per meter ws2811 are 12volt.
Sent from my SCH-I545 using Tapatalk
I used the ws2811 30 led/10ic per mtr (here) on my 12 strip tree. My tree was only 3 metres tall, but it looked just right in my display. I only had to sequence 360 pixels as opposed to 1080 if I had used 30ic/30 led per metre
I second that.....I looked at Habbosrus's tree and it looks awesome....I planned my tree this year off his design (I may use wood for frame instead of PVC).
On another note, the strips he used are now lower in price, 28$/5M roll (just dropped the other day).
http://www.aliexpress.com/store/product/5m-led-digital-strip-DC12V-input-WS2811IC-256-scale-10pcs-IC-and-30pcs-5050-SMD-RGB/701799_568458133.html
I agree, very awesome. I was looking at those exact strips and then noticed holiday coro has them for $1 cheaper for their pre sale. Appreciate the info, definitely going with these strips.
One other comment on using flex strips. They are very waterproof being that they are in a sleeve. I had a few percent failure rate on them. The root cause was cold solder joints on the resistors. Be careful how you zip tie them. I fixed broken lights be reflowing the solder with flux. This does call for cutting the sleeve.
So better waterproofing, perfect spacing is the good, if you get a bad section harder to fix

