My plan this year is to use polyester banding with a piece of 2 sided carpet tape (about an inch 1" or 2") between the silicone jacket on the strip and the banding material and then a zip tie at the joints just snug enough to hold it all in place. End of season I will roll up the assembled strip and banding and store them on a reel.
Glad I kept track of this thread looks like I may have to also have rethink of how to attach strips to hdpe fence slats for a matrix (was planning tie wraps), figure the top and bottom need to be the tightest.
I use plastic screen track and tie wrap every 18 inches. All the tie wrap pressure is on the track.
Sent from my SCH-I545 using Tapatalk
Before you ask. The screen track is called Screen Tight 1 1/2 in. Porch Screening System Base Strip. Home Depot and Lowes carry it. The center fits strip lighting great and you can cut off the extra on the sides if you want. Also note that the same track mounts GECE lights if you cut out the center.
Sent from my SCH-I545 using Tapatalk
Since the track is sold in 8 foot sections, do you fasten the track to pvc or wood to make the 5m lengths for the strips? This sounds like the ideal solution, just trying to visualize how it all fits together.
The track has mounting holes in the center. Some mount them to the house. Seen a couple other methods. I mounted them to 1x2 wood and I'm putting tint tubes over them.
Sent from my SCH-I545 using Tapatalk
I used the whole 8ft track and half a 5 reel for my tubes.
Sent from my SCH-I545 using Tapatalk
Not sure if your stuff is in storage yet. Can we get some pictures to go with the descriptions?



